Avocent SwitchView SC Manual De Usuario

2.     Locate your PS/2 keyboard and mouse, as well as your VGA video monitor. 

3.     Plug your VGA monitor cable into the port labeled “VIDEO” on the back of your 

SwitchView SC. Plug your PS/2 keyboard cable and your PS/2 mouse cable into 
the ports labeled “KBD” and “MSE” respectively.

1.     Locate your first input cable. It will have a 25-pin “D” connector at one 

end. Plug this cable into any available lettered channel port on the rear 
of the SwitchView SC. The other end of the input cable will have three 
connectors: a 15-pin “HDD” connector for your video, a 6-pin miniDIN 
connector for a PS/2 keyboard connection and a 6-pin miniDIN connector 
for a PS/2 mouse connection. The PS/2 mouse connector is green and 
marked with a mouse icon.  

        Plug these connectors into the matching ports on your computer.