Savin SP 3300 Series Manual De Usuario

Getting started

1.1

The Network Printer Card allows you to connect your printer directly to a 
network to share the printer among multiple users. The printer functions 
as a network print server supporting various network environments, such 
as Windows 2000/XP/Vista, Windows Server 2003, and Macintosh 8.6 
or higher. 

This guide explains how to connect the Network Printer Card and set up 
your printer as a print sever over the network. 

This guide assumes that you have:

• A good working knowledge of your network utilities

• A supported network operating system

• A fully operational computer system

• Access to the supervisor account as a network administrator, or 

access to an account that has supervisor and print server operator 
privileges

Administrators and users can configure, and use printers on the 
following supported network operating systems:

Note: Your printer may not support all of the listed computing 
environments (operating systems). Therefore, check the network 
environment your printer supports in the user's guide that came with the 
printer.

Windows

2000, XP, Vista, 
Server 2003

TCP/IP, 
EtherTalk, 
SNMP, 
HTTP 1.1

Macintosh

Macintosh 8.6 ~ 
9.2, 10.1 ~ 10.5, 
or higher

TCP/IP, 
EtherTalk, 
SNMP, 
HTTP 1.1, 
Bonjour

The following hardware is required to configure your printer for network 
applications.

Use a twisted pair cable with an RJ-45 connector to connect the 
printer to your network. 

Once a connection is established between the wired network 
printer card and your network, the link LEDs on the card light.

Set up your printer's IP address. See “IP address setup” on 
page 2.2. 

IBM - 
compatible PC

• 80486 CPU or higher
• Minimum of 16 MB of RAM
• 2 MB of free disk space

Macintosh

• PowerPC 68020 or higher 
• Minimum of 8 MB of RAM
• 2 MB of free disk space

Link LED: Lights when the printer card is

connected to the network.

Activity LED: Blinks when data packets

are being transferred.