Adam Equipment cbda Manual De Usuario

 

 

 

•  The basic weighing functions are same for both the scales- local and 

remote.  However the number of weighing divisions may be less on 
the remote scale dependant on the total capacity of the load cell/s 
used. 

 

•  Each scale (local or remote) has the ability to count parts based on 

the current unit weight. This is best obtained by performing a sample 
on the local scale which may have the best sensitivity. Then the scale 
can be switched to the remote where large quantities can be counted. 

 

•  Each scale has a separate tare value that can be entered through the 

keypad or by placing a weight on the platform and pressing the 
[Tare/Zero] key.  The tare value for each scale is retained as the user 
switches between the remote and local scales. 

 

•  Either scale can be used to determine a unit weight. 

 

•  When the scale is switched from local to remote, a clear display will 

be shown to identify the change and the scales will count based on 
the tare and unit weight currently in use for the scale selected.  
Display for the change is: 

 

“

c h A n g E

” ”

L o c A L

“ 

and 

“

c h A n g E

” ”

r e m o t E

 “ 

 

The display will be based on the 7 segment interpretations, some of 
letters are shown later. 

 

•  The switch from local scale to remote scale should be possible at any 

time by pressing [Local/Rem] or if the user enables the function it 
can happen anytime the weight on the remote scale changes from 
negative value or zero to a positive value greater than 50d.  

 

NOTE: For frequently used items, counting is made easier by using PLU 
numbers (Product Look Up). Up to 100 PLU’s can be stored and recalled. 
See section 6.4 on PLU for details. Place the item on the pan and enter 
using the keypad “

PLUxx” (where xx is the PLU number associated with 

that item). The scale will display the Total Weight, Unit weight and the 
Count of the item in the respective windows. 

 

11