Epson 81p Manual De Usuario

■

Projection

Front:

 Projector is in front of the screen.

Front/Ceiling:

 Projector is in front of the screen, mounted 

upside-down from the ceiling.

Rear:

 Projector is behind the screen.

Rear/Ceiling:

 Projector is behind the screen, mounted 

upside-down from the ceiling.

■

Operation

Direct Power:

 When this feature is enabled, projection starts 

as soon as you plug in the power cord. You don’t have to 
press the P

Power

 button.

Sleep Mode:

 When this feature is enabled, the projector 

lamp automatically turns off when the projector has not 
received any input signals for 30 minutes. This conserves 
electricity, cools the projector, and extends the life of the 
lamp. To resume projecting, press the P

Power

 button.

■

Standby

 

Mode

Set to 

Network ON

 to monitor your projector over a 

network and perform other network functions when the 
projector is in standby mode.

■

COM Port

Turn on 

USB

 only if you’re controlling the projector from a 

computer with the EMP Link 21L software. This software 
can be downloaded from the Epson website at 
support.epson.com. (You must turn the projector off and 
then on again to use the new setting.)

■

Language

Select the language to be used for the projector menus.

4. When you’re finished, press 

Esc

 or 

Menu

.

Direct Power

is turned on, press the 
P

Power

the projector off, wait until 
the P power light turns a 
steady orange, then unplug 
the power cord.