NEC express5800-100 series n8100-1635f Manual De Usuario

Troubleshooting  7-33

When the modular server is not booted from the NEC EXPRESSBUILDER DVD, check the
following:

‰

 

Did you set the NEC EXPRESSBUILDER during POST and restart the modular

server?

→  If you do not set the NEC EXPRESSBUILDER during POST and restart the

modular server, an error message will appear or the OS will boot.

‰

 

Is BIOS configuration correct?

→  The boot device order may be specified with the BIOS SETUP utility of the

modular server. Use the BIOS SETUP utility to change the boot device order to
boot the system from the optical disk drive first.

<Menu to check: [Boot]>

‰

 

Is the connected Flash FDD or inserted floppy disk formatted?

→  Make sure that the Windows recognizes that the connected Flash FDD or inserted

floppy disk is formatted. If not, format it.

→  For detailed explanations on NEC ESMPRO, refer to the online document stored

in the NEC EXPRESSBUILDER DVD that comes with your N8141-49F Module
Enclosure (1way).