NEC express5800-100 series n8100-1635f Manual De Usuario
General Description 2-3
NAMES AND FEATURES OF COMPONENTS
This section describes the names and features of the components in the device.
Front View
1 POWER/SLEEP lamp (green)
The lamp goes on green when the modular server is powered on.
2 POWER/SLEEP switch
The switch is intended to turn on or off the power of the modular server itself.
Pressing the switch for 4 seconds or longer causes the power supply to be turned off forcibly.
Pressing the switch for 4 seconds or longer causes the power supply to be turned off forcibly.
3 DISK ACCESS lamp (green)
The lamp indicates access status of hard disk drive.
4 STATUS lamp (green/amber)
The lamp indicates the status of the modular server. See "Lamp Indications" described later
for the indications and meanings of the lamp.
for the indications and meanings of the lamp.
5 DUMP (NMI) switch
Press this switch to run the memory dump. Not used in usual operation.
6 UID (Unit ID) lamp (blue)
The lamp is intended to identify the modular server in the system. The lamp is lit by a switch
or software command.
When the recognize command is received from software, the lamp blinks.
If you press the ID switch, the lamp goes on.
or software command.
When the recognize command is received from software, the lamp blinks.
If you press the ID switch, the lamp goes on.
1
2
5
7
8
9
3
4
6
4
6
10
Sliding tag
Pull straight
N code
Serial number
N8100-1635F XXXXXXX