Korg toneworks ax3000g Manual De Usuario
DRIVE/AMP
CABINET
PRE EFFECT
MODULA
TION
DELA
Y
REVERB
Effect Type
Tuner
35
3. ANALOG DELAY (ANLG DL)
This models an analog delay that used a bucket-brigade device (BBD) instead of a
tape mechanism and was known for its compactness and reliability. It is character-
ized by a warmly distorted sound.
tape mechanism and was known for its compactness and reliability. It is character-
ized by a warmly distorted sound.
4. MOD DELAY (MOD DLY)
This models Korg’s first digital delay, the SDD-3000. You can also use this to produce
chorus or flanger-like effects by setting a short TIME and using the LFO to modulate it.
chorus or flanger-like effects by setting a short TIME and using the LFO to modulate it.
5. SWEEP DELAY (SWEEP DL)
This also models the SDD-3000. Here you can use the envelope of your guitar sig-
nal to control the DELAY TIME, and by setting a short TIME and raising the FEED-
BACK you can produce a distinctive flanger effect. Even with conventional settings
of TIME, you can produce unique effects that would not be possible with an LFO.
nal to control the DELAY TIME, and by setting a short TIME and raising the FEED-
BACK you can produce a distinctive flanger effect. Even with conventional settings
of TIME, you can produce unique effects that would not be possible with an LFO.
[4] “MODE”
Specifies the combination of heads that will be used.
1: Use one head (C).
2: Use two heads (A, B).
3: Use two heads (B, C).
4: Use two heads (A, C).
5: Use three heads (A, B, C).
2: Use two heads (A, B).
3: Use two heads (B, C).
4: Use two heads (A, C).
5: Use three heads (A, B, C).
[5] MIX
0.0–10.0
* Adjusts the mix amount of the delay.
[1] “TIME”
1–2700[ms]
* Sets the delay time.
[2]
“FEEDBACK”
0.0–10.0
* Adjusts the amount of feedback.
[3] “TONE”
1.0–10.0
* Adjusts the tone of the delay.
[5] “MIX”
0.0–10.0
* Adjusts the mix amount of the delay.
[1] “TIME”
3–2700[ms]
* Sets the delay time.
[2] “FEEDBACK” 0.0–10.0
* Adjusts the amount of feedback.
[3] “TONE”
1.0–10.0
* Adjusts the tone of the delay.
[4] “SPEED”
0.1–10[Hz]
* Adjusts the modulation speed.
[5] “MIX”
0.0–10.0
* Adjusts the mix amount of the delay.
[1] “TIME”
26–2700[ms] * Sets the delay time.
[2] “FEEDBACK” 0.0–10.0
* Adjusts the amount of feedback.
[3] “TONE”
1.0–10.0
* Adjusts the tone of the delay.
[4] “SENS”
0.0–10.0
* Adjusts the sensitivity at which the effect
responds to the volume of your guitar.
[5] “MIX”
0.0–10.0
* Adjusts the mix amount of the delay.