Digidesign 2 Manual De Usuario

Working with Sends

In Stand-alone Mode, each Input channel has 
four fixed sends, with the first two dedicated to 
the internal Delay and Reverb processing of 
Digi 002. 

To display and edit the sends to the Delay:

1  

Press the Send switch in the upper left-hand 

corner of the Digi 002 unit, in the Console View 
area. 

2  

Press the Send A switch (located immediately 

below the Send switch you just pressed). The ro-
tary encoders show the levels for the corre-
sponding sends on each track.

3  

Adjust the rotary encoders as desired to send 

signal to the onboard Delay. 

4  

Press the Master Fader switch, located to the 

left of the Navigation and Transport section. 
The return track for Send A is named Dly. 

5  

Adjust the fader volume and pan position for 

the return track. 

6  

Press the Master Fader switch again to return 

to the previous view, or press the Pan switch to 
return to Home View. 

To display and edit the sends to the Reverb:

1  

Press the Send switch in the upper left-hand 

corner of the Digi 002 unit, in the Console View 
area. 

2  

Press the Send B switch. The rotary encoders 

show the levels for the corresponding sends on 
each track.

3  

Adjust the rotary encoders as desired to send 

signal to the onboard Reverb. 

4  

Press the Master Fader switch, located to the 

left of the Navigation and Transport section. 
The stereo return tracks for Send B are named 
RvbL and RvbR. 

5  

Adjust the fader volume for the return tracks. 

6  

Press the Master Fader switch again to return 

to the previous view, or press the Pan switch to 
return to Home View.