Digidesign 2 Manual De Usuario

Installing DigiGain

DigiGain is an optional volume control applet 
that allows you to control the master output of 
the Digi 002 as well as control the monitoring 
input levels of the WaveDriver independently 
from your third-party audio applications. By de-
fault, the master level is set to 0 dB.

DigiGain is not available as a volume control on 
the Windows task bar. As a result, the following 
settings will be disabled in the Multimedia con-
trol panel (Audio tab). “Show volume control on 
the taskbar,” the playback volume control, and 
the recording volume control will all be dis-
abled.

Before Installing DigiGain

The WaveDriver must be installed before install-
ing DigiGain. If you did not install the 
WaveDriver or reboot the computer after install-
ing the WaveDriver, do so now.

Installation Instructions

To install DigiGain:

1  

Insert the Pro Tools LE Installer CD.

2  

Locate DigiGain.exe on the CD, and copy it to 

the Desktop. 

Removing DigiGain

To remove DigiGain:

1  

Delete (move to Recycle Bin) DigiGain.exe 

from the Desktop.

2  

Empty the Recycle Bin.

Using DigiGain

Master Level

This slider adjusts the output volume of chan-
nels 1–2 on the Digi 002.

Master Mute

The master mute checkbox, when checked, 
mutes all output of channels 1–2 of the 
Digi 002.

Record Monitor Level

These sliders adjust the output monitoring level 
of the Left/Mono and Right recording channels.

Record Monitor Mute

The Mute buttons under the Record Monitor 

Level sliders individually mute the Left/Mono 
and Right recording streams.