Siemens siemens network router mc35 Manual De Usuario
Remote-SAT User's Guide
MC35_SAT_01_v02.00
Page 56 of 65
11.01.2002
1.5.3 Event Response Commands
The following types of responses are neither issued in reaction to a formerly given notification (^SSTN)
nor a AT^SSTGI sequence. These responses are intended to report activities at the external
application, e.g. when the user is pressing a key.
nor a AT^SSTGI sequence. These responses are intended to report activities at the external
application, e.g. when the user is pressing a key.
1.5.3.1 AT^SSTR Remote-SAT Event Response – Menu Selection (211)
Write command
AT^SSTR=211,
<status>,
< itemId >
<status>,
< itemId >
The TA specifies a user´s selection of an item from the main menu, that was set
up using SETUP MENU command. Alternatively help can be requested.
up using SETUP MENU command. Alternatively help can be requested.
Response
OK
Parameters
<cmdType> 211 – Proactive command ID, see Table 1
<status>
Unsigned Integer, range 0-255
0
0
Command performed successfully.
19
Help information required by the user, no other value can
be input.
be input.
<itemId>
Id of selected item (1-255)
Reference
Siemens
Note
1.5.3.2 AT^SSTR Remote-SAT Event Response – User Activity (232)
Write command
AT^SSTR=232
Sent by the customer application to indicate that a key has been pressed.
Response
OK
Parameters
<cmdType> 232 – Event command ID, see Table 1
Reference
Siemens
Note