Sub-Zero w302210i Manual De Usuario

Dimensions in parentheses are in
millimeters unless otherwise specified.

Refer to the illustrations and specifications

for overall dimensions and installation specifics.

For optimal performance, a Pro 27" (686)

deep wall hood is recommended for use with
ranges and rangetops that contain a charbroiler
or griddle.

The hood should be as least as wide as the

cooking surface. It is recommended that the
hood overlap the cooking surface by 3" (76) on
either side.

Installation of all Pro wall hoods should be

30" (762) to 36" (914) from the bottom of the
hood to the countertop. Follow the dimensions
shown in the Installation illustration.

Models W302210I and W302210IR come

with a 600 CFM internal blower and are vertical
discharge. Refer to the end of this section for
Pro ventilation recommendations and blower
options.

IMPORTANT NOTE: Install this ventilation hood
only with a Wolf blower.

Pro wall hoods require a separate, grounded

110/120 V AC, 60 Hz power supply. The service
should have its own 15 amp circuit breaker.
Placement of the electrical supply is not critical,
as long as you provide a minimum of 6" (152)
of 120 V AC, 60 Hz power cable. Locate electri-
cal within the shaded area shown in the Instal-
lation illustration. Note that the location of the
electrical supply will differ between vertical and
horizontal discharge blowers.

You must follow all National Electrical Code

regulations. In addition, be aware of local codes
and ordinances when installing your service.

Refer to the installation instructions shipped

with each Wolf product for detailed specifica-
tions. This information can also be found on
our website, wolfappliance.com.