Epson perfection photo 3490 Manual De Usuario

Epson Perfection 3490 Photo

6 - Epson Perfection 3490 Photo

6/05

If an error occurs, the scanner stops operating and the scanner 
light flashes red. This indicates one of the following problems:
❏ The scanner is not connected to your computer properly or 

your software is not fully installed. See the Start Here sheet 
that came with your scanner for instructions on installing 
the scanner software and connecting the scanner to your 
computer.

❏ The scanner transportation lock is locked. Slide the lock to 

the unlock position.

After trying these solutions, turn off the scanner by unplugging 
its power cord, then plug it in to turn it back on. If the scanner 
light is still flashing:
❏ The scanner may be malfunctioning.
❏ The scanner lamp may need to be replaced.
❏ The connected optional equipment may be malfunctioning.

Before transporting the scanner for a long distance or storing it 
for an extended period of time, you need to lock the scanner’s 
carriage to prevent damage. 

1. Plug in the scanner, connect it to your computer, and wait 

until the carriage moves to the home position (position 
nearest the buttons). While the 

]

 Start light is green, 

unplug the scanner.

2. If the cover cable is attached, 

disconnect it.

3. To lock the transportation lock, lift 

the scanner and slide the lock to the 
locked position. This secures the 
carriage.

Caution: Do not turn the scanner over; this may damage it.

4. Attach the protective materials and repack the scanner in its 

original box.

CPD-19431

Epson Perfection 3490/3590 Photo 
Start Here sheet

CPD-19432

Epson Perfection 3490/3590 Photo 
Scanner Software CD-ROM

CPD-19433

Epson Perfection 3490/3590 Photo 
Notices booklet

—

Epson Perfection 3490/3590 Photo 
User’s Guide (HTML)