SMSC EVB-EMC1002 Manual De Usuario

EVB-EMC1002/EMC1033 User Manual

 SMSC EMC1002/EMC1033

Revision 1.1 (12-14-06)

3

To use the EVB you will need:

n

A PC running Windows 2000 or XP

n

Display resolution 800x600 (or larger to view several windows simultaneously)

n

An available USB port

n

Windows Register Manager application allows viewing and changing register values as well as 
graphing temperature history

n

USB communication to evaluation board

n

Resistive Error Correction can be demonstrated

n

LEDs for 

Alert/Therm2

 and 

Addr/Therm

 indication as well as USB bridge activity

n

Low cost fan control driven by 

Alert/Therm2

 and 

Addr

/

Therm

 outputs

n

An external SMBus master may also be used (circuit modifications required)

1. Install the RegMan application and device driver on a PC by running Setup.exe from the RegMan

distribution CD. A revision history and install/uninstall notes may be found in the readme.txt file on
the disk. 

2. Connect the supplied USB cable to an available USB port on the PC. Plug the “mini-B” end of the

USB cable into EVB connector P6. The +3.3V, Bridge ACT, 

Alert/Therm2

 and 

Addr

/

Therm

 LEDs

should illuminate. After the EVB is connected to the PC the “Find New Hardware” wizard will pop
up for USB driver installation. Follow the instructions in the readme.txt file to complete the
installation process. 

3. Start the EVB Software by selecting the Register Manager application from the SMSC folder from

the Programs Windows Start menu. The EVB will initialize and the Register Manager Help screen
will appear as in 

. The USBAct LED should be blinking when the Register Manager is

running.