Sharp PGLX3500 Manual De Usuario

-22

Resetting the Lamp Timer of the Projector via LAN

When the projector is connected to a network, you can use the communications program
to send a command to reset the lamp timer. The example below uses Windows

XP as the

operating system. When you use Windows Vista

, use other communications program

referring to the following steps, because Windows Vista

does not come with

HyperTerminal.

Click “Start” – “All Programs” –

“Accessories” – “Communica-

tions” – “HyperTerminal”.

• If you do not have HyperTerminal installed,

see the operation manual of your computer.

• Depending on the settings of your computer,

you may be required to enter your area code
and other details. Enter the information as
required.

Enter a name in the “Name” field,

and click “OK”.

If you are required to enter the

area code, enter it in the “Area

code” field. From the “Connect

using” drop-down menu, select

“TCP/IP (Winsock)”, and click

“OK”.

Enter the IP address of the

projector in the “Host address”

field (see “TCP/IP” on the

“Network” menu of the projector),

and enter the data port of the

projector in the “Port number”

field (“10002” is the factory default

setting), and click “OK”.

Select
“TCP/IP (Winsock)”