Promise Technology EX8650 Manual De Usuario
Chapter 5: Management with WebPAM PRO
97
•
To create an out-of-band connection: Type the Subsystem’s
management port IP address into the address field.
management port IP address into the address field.
6.
Click the Submit button.
The new Subsystem or Host PC is added to Tree View.
The new Subsystem or Host PC is added to Tree View.
In-Band versus Out-of-Band
In-band connection means the WebPAM PRO Agent is running on the Host PC
or server. Management commands to a subsystem travel through the
subsystem's data ports. With an in-band connection, you can have multiple
subsystems under the same Host PC or server.
or server. Management commands to a subsystem travel through the
subsystem's data ports. With an in-band connection, you can have multiple
subsystems under the same Host PC or server.
Out-of-band connection means the WebPAM PRO Agent is running on the
subsystem. Management commands to a subsystem travel through the
subsystem's management port.
subsystem. Management commands to a subsystem travel through the
subsystem's management port.
Deleting a Subsystem or Host
When you delete a subsystem or host PC, you only remove it from WebPAM
PRO’s list of monitored systems. This action has no effect upon the disk arrays,
logical drives, or data stored on the RAID.
PRO’s list of monitored systems. This action has no effect upon the disk arrays,
logical drives, or data stored on the RAID.
To delete a subsystem or host PC:
1.
1.
Log into WebPAM PRO as the Administrator or a Super User.
2.
Click the Administrative Tools
icon in Tree View.
3.
Click the Subsystem/Host Management
icon.
4.
Click the Delete Subsystem/Host tab in Management View.
5.
Check the box to the left of the subsystem or host PC you want to delete.
6.
Click the Submit button.
7.
In the confirmation box, type the word confirm in the field provided.
8.
Click the OK button.
Setting User Privilege
To set user privilege:
1.
Click the Administrative Tools
icon in Tree View.
2.
Click the Subsystem/Host Management
icon.
3.
click the IP address link of the Subsystem or Host you want to access.
4.
Beside the name of the user whose privilege you want to change, choose
the privilege level from the Privilege dropdown menu.
For definitions of each privilege level, see “List of User Privileges” on
page 94.
the privilege level from the Privilege dropdown menu.
For definitions of each privilege level, see “List of User Privileges” on
page 94.