Promise Technology EX8650A Manual De Usuario
SuperTrak EX Series User Manual
172
Choosing Stripe Block Size
You set the stripe block size, also called block size, when you create a logical
drive. With SuperTrak, the choices are 64 KB, 128 KB, 256 KB, 512 KB, and
1024 KB. 64 KB is the default.
drive. With SuperTrak, the choices are 64 KB, 128 KB, 256 KB, 512 KB, and
1024 KB. 64 KB is the default.
Your choice will directly affect performance. There are two issues to consider
when choosing the stripe block size.
•
when choosing the stripe block size.
•
Choose a stripe block size equal to or smaller than the smallest cache buffer
found on any physical drive in your logical drive.
A larger value slows the logical drive down because physical drives with
smaller cache buffers need more time for multiple accesses to fill their
buffers.
found on any physical drive in your logical drive.
A larger value slows the logical drive down because physical drives with
smaller cache buffers need more time for multiple accesses to fill their
buffers.
•
If your data retrieval consists of fixed-size data blocks, such as some
database and video applications, choose that data block size as your stripe
block size.
database and video applications, choose that data block size as your stripe
block size.
Generally speaking, email, POS, and webservers prefer smaller stripe block
sizes. Video and database applications prefer larger stripe block sizes.
sizes. Video and database applications prefer larger stripe block sizes.
See “Creating a Logical Drive” on page 65 and page 136, and “Creating a Disk
Array – Advanced Configuration” on page 132.
Array – Advanced Configuration” on page 132.
Choosing Sector Size
You set the sector size when you create a logical drive. With SuperTrak, the
choices are 512 B, 1 KB, 2 KB, and 4 KB. 512 B is the default.
choices are 512 B, 1 KB, 2 KB, and 4 KB. 512 B is the default.
A sector is the smallest addressable area on a physical drive. Sector Size refers
to the size of sector measured by the number of bytes of data it can hold. The
most common sector size is 512 bytes (512 B). A smaller sector size results in a
more efficient use of a physical drive’s capacity. 512 B is the default sector size
for logical drives on SuperTrak.
to the size of sector measured by the number of bytes of data it can hold. The
most common sector size is 512 bytes (512 B). A smaller sector size results in a
more efficient use of a physical drive’s capacity. 512 B is the default sector size
for logical drives on SuperTrak.
The number of usable sectors is limited by the addressing method of the
computer's operating system:
•
computer's operating system:
•
Windows 2000 and Windows XP (32-bit) support 10-bit logical bit addressing
(LBA), so with 512 B sectors, they can only support up to 2 terabytes (TB) of
data storage capacity. To increase the capacity, you must use larger sectors.
See “2 TB Limitation” on page 173.
(LBA), so with 512 B sectors, they can only support up to 2 terabytes (TB) of
data storage capacity. To increase the capacity, you must use larger sectors.
See “2 TB Limitation” on page 173.
•
Windows XP (64-bit), Windows 2003 Server, and Windows Vista support 64-
bit LBA, so they are not affected by this limitation. For these OSes, always
choose the default 512 B sector size.
bit LBA, so they are not affected by this limitation. For these OSes, always
choose the default 512 B sector size.
•
Linux operating systems with the 2.4 kernel do not support variable sector
sizes. For these OSes, always choose the default 512 B sector size.
sizes. For these OSes, always choose the default 512 B sector size.