Polycom kirk wireless server 6000 Manual De Usuario
NetEngine IAD User Guide
Troubleshooting and Diagnostics
268
Cannot receive or send
data
data
Incorrect PVC/DLCI
set for data channel
set for data channel
Verify these settings:
VPI: 0 to 255
VCI: 0 to 65535
DLCI: 16 to 1023
(default PVC 0/38; DLCI
32)
View Interface
(page
VPI: 0 to 255
VCI: 0 to 65535
DLCI: 16 to 1023
(default PVC 0/38; DLCI
32)
View Interface
(page
) and Media
statistics (page
) to
check the pack receive
and send status.
and send status.
Incorrect network
setup
setup
Check and correct
network setup as
necessary.
network setup as
necessary.
If IAD is configured as
router:
router:
Incorrect or missing
LAN or WAN IP
address
LAN or WAN IP
address
Ensure that both the LAN
and WAN IP addresses
are configured.
and WAN IP addresses
are configured.
Incorrect or missing
default static route
default static route
).
Incompatible RIPv1 Check and correct subnet
masks (255.255.255.0)
Update RIPv1 to RIPv2.
Update RIPv1 to RIPv2.
If the IAD is configured
as a bridge:
as a bridge:
incorrect bridging
parameters
parameters
Review IAD configuration
(page
(page
) and current
bridge status (page
).
Correct as necessary
Incorrect
connection
connection
Ensure that the IAD is
connected to another
bridge
connected to another
bridge
Missing peer or
converter
converter
Install a converter to
convert 1483 cells to
Ethernet packets.
convert 1483 cells to
Ethernet packets.
Table 14–1.Troubleshooting—Symptoms and Causes
Symptom
Probable Cause
Corrective Action