Polycom RMX 2000 Manual De Usuario

Use the following procedure to replace a faulty MPM Module types F 

or H:
1

Ensure that power switch to the RMX is turned OFF (O).

Unscrew the screws on the front panel of the RMX that secure the 

MPM Module.

Use the metal ejectors to pull the MPM Module out of its slot in the 

Backplane.

Carefully slide the MPM Module out through the front panel.

Slide in the replacement MPM Module.

Push the MPM Module firmly into the Backplane, making sure it is 

properly seated in its slot.

Ensure that the metal ejectors are fully retracted into their housings.

Tighten the screws on the front panel of the RMX that secure the 

MPM Module.

Turn ON the RMX.