Polycom VSX Series Manual De Usuario

 Setting Up Your System Hardware

2 - 15

All VSX systems allow you to connect a second camera or other video source. 

The component systems require that you connect at least one camera so that 

your site can send video.

You can connect a document camera to show detailed close-up views of 

printed documents or other small items. The VSX 3000 and VSX 3000A 

systems provide one composite video input.
Refer to the system setup sheet for information about connecting a document 

camera.

VSX 7000 and VSX 7000s systems provide an S-Video input for a second 

camera. You can connect a camera to the VCR video input on the VSX 5000, 

VSX 6000, or VSX 6000A system. On the VSX 6000 and VSX 6000A systems, 

the video input is for a composite video signal. Refer to the release notes for a 

list of supported PTZ cameras.
VSX 5000, VSX 6000, and VSX 6000A systems do not provide pan/tilt/zoom 

(PTZ) control for a second camera.
You can use the RS-232 serial port on the VSX 7000 or VSX 7000s system for 

camera control. Refer to your system’s setup sheet for connection details. 

If you have a component system, you need to connect a camera to the system 

so that people at other sites can see your site. Refer to your system’s setup 

sheet for connection details. 
The component systems provide S-video connections for two cameras. The 

VSX 8000 system provides the S-video signal to the main camera through BNC 

connectors. Refer to the release notes for a list of supported PTZ cameras.
You can configure a VSX 7000e or VSX 8000 system with a Polycom 

PowerCam Plus to track to the speaker’s voice or to camera presets.