Polycom VSX Series Manual De Usuario

Administrator’s Guide for the VSX Series

3 - 6

Use the following sections to configure the system so that users can place and 

receive video calls using IP on your LAN or WAN:

• H.323 Settings, includes Gatekeeper and Gateway

• SIP Settings

• Quality of Service

• Firewall or NAT

• Streaming

If your network uses a gatekeeper, the system can automatically register its 

H.323 name and extension. This allows others to call the system by entering 

the H.323 name or extension instead of the IP address.

Go to System > Admin Settings > Network > IP > H.323 Settings.

Configure these settings:

Lets users placing a gateway call enter the H.323 extension 
separately from the gateway ID. 
If you do not select this setting, users make gateway calls by 
entering the call information in this format:
gateway ID + ## + extension

Specifies the name that gatekeepers and gateways use to 
identify this system. You can make point-to-point calls using 
H.323 names if both systems are registered to a gatekeeper.
The H.323 Name is the same as the System Name, unless 
you change it. Your organization’s dial plan may define the 
names you can use.

Lets users place point-to-point calls using the extension if both 
systems are registered with a gatekeeper, and specifies the 
extension that gatekeepers and gateways use to identify this 
system.
The default H.323 Extension can be changed. Your 
organization’s dial plan may define the extensions you can 
use.