Philips 46PFL8605K Manual De Usuario
![Philips](https://files.manualsbrain.com/attachments/80de5467260b5059767c26fa7238b8f78bd7bc77/common/fit/150/50/0ca3a4fc6a2509197ba66802c76c9b64194b944a2b6a8471ad8854af95c2/brand_logo.png)
4.3 Satellite channels
Introduction
As well as the DVB-T and DVB-C reception, this TV has a built-in
satellite DVB-S receiver. With a satellite dish antenna connected,
you can receive digital satellite channels. You do not need an
external satellite receiver.
satellite DVB-S receiver. With a satellite dish antenna connected,
you can receive digital satellite channels. You do not need an
external satellite receiver.
LNB
An LNB -Low Noise Block-downconverter- captures the signals
from a satellite and is mounted at the end of the pole on the dish
antenna. The TV can receive signals from 4 different LNBs.
An LNB -Low Noise Block-downconverter- captures the signals
from a satellite and is mounted at the end of the pole on the dish
antenna. The TV can receive signals from 4 different LNBs.
Installation
With a properly set-up and connected satellite dish antenna, you can
install satellite channels on the TV.
You can install channels from 4 different satellites (4 LNBs).
install satellite channels on the TV.
You can install channels from 4 different satellites (4 LNBs).
1 Install
To search for satellites and install satellite channels, press
To search for satellites and install satellite channels, press
h >
Setup > Search for satellite and press OK. If you have already
installed satellites, select Reinstall channels and press OK.
installed satellites, select Reinstall channels and press OK.
2 Connection type
Before you select Start, you must set up the connection type. The
connection type will determine the number of LNBs (the number of
different satellites) you can install. For ease of use, select the correct
type for the number of satellites you want to install.
Before you select Start, you must set up the connection type. The
connection type will determine the number of LNBs (the number of
different satellites) you can install. For ease of use, select the correct
type for the number of satellites you want to install.
To set up the connection type, select Settings and press OK. Select
Connection type and select One LNB if you have only one LNB,
select DiSEqC Mini for 2 LNBs or select DiSEqC 1.0 to install 3 or 4
LNBs. Select Done to close the settings.
Connection type and select One LNB if you have only one LNB,
select DiSEqC Mini for 2 LNBs or select DiSEqC 1.0 to install 3 or 4
LNBs. Select Done to close the settings.
3 Search for satellites
To start the installation, select Start and press OK. The TV searches
for all available satellites. This can take several minutes. If no satellites
are found, check the antenna connections and the position of the
dish antenna.
To start the installation, select Start and press OK. The TV searches
for all available satellites. This can take several minutes. If no satellites
are found, check the antenna connections and the position of the
dish antenna.
The signal quality shown is not always representative of the signal
quality of all channels on that satellite.
To repeat the search for satellites, select Restart and press OK. If
you are satisfied with the satellites found, you can install all their
channels.
quality of all channels on that satellite.
To repeat the search for satellites, select Restart and press OK. If
you are satisfied with the satellites found, you can install all their
channels.
4 Install channels
To install all channels for the satellites you found, press Install. The
installation can take several minutes per satellite.
When the installation is finished, you can find all channels in the
satellite Channel list.
To install all channels for the satellites you found, press Install. The
installation can take several minutes per satellite.
When the installation is finished, you can find all channels in the
satellite Channel list.
More settings
For most satellites, you do not need to change the LNB settings but,
if you are searching for a specific satellite on C-band for instance,
you need to set the LNB you use for this satellite to Single. Or, if
you are an expert user, you might need a Custom setting for the
LNBs you use.
For most satellites, you do not need to change the LNB settings but,
if you are searching for a specific satellite on C-band for instance,
you need to set the LNB you use for this satellite to Single. Or, if
you are an expert user, you might need a Custom setting for the
LNBs you use.
Reset
You might have lost track of the settings you set up.
To reset the satellite installation settings to factory settings, select
You might have lost track of the settings you set up.
To reset the satellite installation settings to factory settings, select
Reset in Settings and press OK.
Signal reception test
The automatic channel install might have missed a specific channel or
channels from a transponder. You can add a transponder with Signal
reception test. Read Help > Setup > Satellite channels > Signal
reception test.
The automatic channel install might have missed a specific channel or
channels from a transponder. You can add a transponder with Signal
reception test. Read Help > Setup > Satellite channels > Signal
reception test.
Dish antenna connection
Read more about the antenna connection for satellite in Help >
Read more about the antenna connection for satellite in Help >
Connections > First connections > Satellite antenna.
Add or Remove
If satellite channels are already installed, you can add an extra satellite
to the installation. You can install channels from 4 different satellites - 4
LNBs.
to the installation. You can install channels from 4 different satellites - 4
LNBs.
1 Connection type
Check the Connection type setting before you add a satellite. The
setting One LNB receives only one LNB, the setting DiSEqC Mini
receives only 2 LNBs and the setting DiSEqC 1.0 can receive 3 or 4
LNBs.
Check the Connection type setting before you add a satellite. The
setting One LNB receives only one LNB, the setting DiSEqC Mini
receives only 2 LNBs and the setting DiSEqC 1.0 can receive 3 or 4
LNBs.
To check the Connection type first, press
h > Setup > Search for
satellite and press OK. Select Reinstall channels and select Settings
and press OK. Select Connection type and select the setting you
need for the number of satellites you want to install. Select Done to
close the settings. Press
and press OK. Select Connection type and select the setting you
need for the number of satellites you want to install. Select Done to
close the settings. Press
b to close Reinstall channels.
2 Add a satellite
To add a satellite, press
To add a satellite, press
h > Setup > Search for satellite and press
OK. Select Add satellite and press OK. The TV searches for a
satellite on the first free LNB. This can take several minutes.
satellite on the first free LNB. This can take several minutes.
If no satellites are found, check the antenna connections and the
position of the dish antenna. Select Restart or Next LNB.
If there are no free LNBs, you can remove a satellite first. Read
Remove satellites on the following page.
position of the dish antenna. Select Restart or Next LNB.
If there are no free LNBs, you can remove a satellite first. Read
Remove satellites on the following page.
3 Install channels
If you are satisfied with the added satellite, you can install the
channels.
To install all channels, press Install. The installation can take several
minutes. When the installation is complete, you can find the added
channels in the satellite Channel list.
If you are satisfied with the added satellite, you can install the
channels.
To install all channels, press Install. The installation can take several
minutes. When the installation is complete, you can find the added
channels in the satellite Channel list.
You can remove a satellite from your satellite installation.
To remove a satellite, press
h > Setup > Search for satellite.
Select Remove satellite and press OK. Select the satellite you want
to remove and press OK. To confirm, select Yes and press OK. The
satellite and its channels are removed from the installation.
to remove and press OK. To confirm, select Yes and press OK. The
satellite and its channels are removed from the installation.
Update channels
Setup / Satellite channels
53