Philips 550w Manual De Usuario
18
&
Connect the audio cable to the multi channel Surround
receiver and to
receiver and to
AUDIO RECEIVER L
and
R
next to the
CENTRE
connector of your TV 1.
Note: turn off the TV and your surround receiver before
connecting them. Set the Surround receiver’s volume to
minimum.
connecting them. Set the Surround receiver’s volume to
minimum.
é
If you want the loudspeakers of your TV to act as centre
speaker, also connect an audiocable to the multi channel
Surround receiver and to the
speaker, also connect an audiocable to the multi channel
Surround receiver and to the
CENTRE
connector of your
TV 2.
“
Select
centre Input On
in the Source menu. See p. 10.
The loudspeakers of the TV will now only produce centre
sound, the loudspeakers connected to the audio receiver
will produce Surround Sound.The volume has to be
controlled via the multi channel Surround receiver.
sound, the loudspeakers connected to the audio receiver
will produce Surround Sound.The volume has to be
controlled via the multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external
source is blocked via the Channel Lock menu (see p. 13).
source is blocked via the Channel Lock menu (see p. 13).
AUDIO
R
L
CENTRE
SUBW.
2
1
Notes
- The labels for the component video sockets may differ depending on the DVD player or the device connected.
- The labels for the component video sockets may differ depending on the DVD player or the device connected.
Although the abbreviations may vary, the letters B and R stand for the blue and red component signals,
respectively, and Y indicates the luminance signal. Refer to the DVD player’s or devices instructions for use for
definitions and connection details.
respectively, and Y indicates the luminance signal. Refer to the DVD player’s or devices instructions for use for
definitions and connection details.
- This television is designed to accept high definition signal standards 480p, 720p (not with 42PF9966), 1080i
and 1152i as specified by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing output standards which may
cause difficulties for the television to properly display.
Digital devices from different manufacturers have the possibility of differing output standards which may
cause difficulties for the television to properly display.
Warning
: in case you notice scrolling images, wrong colours or no colour, no picture, or even combinations of
these on your screen, check if the connections are done in the correct way or move your digital device further
away from your TV.
away from your TV.
AV1
AV2
R
L
V
H
S-VIDEO
S-VIDEO
Y/G
CVBS
Pr/R
Pb/B
R
L
Pr
Pb
Y
1
2
DVD / Cable Box
3
Multi channel Surround receiver
Devices with Component Video Output Connectors
(YPbPr)
(YPbPr)
&
Connect the three separate component video cables 1
to the device having component video outputs (
to the device having component video outputs (
YPbPr
),
such as DVD-players, laser-disc players, videogame players,
satellite receivers or other equipment, and to the
satellite receivers or other equipment, and to the
Y
,
Pb
and
Pr
jacks of
AV1
or
AV2
on the TV.
é
Connect the audio cable to device’s
AUDIO L
and
R
2
jacks and to the
L
an
R
audio jacks of
AV1
or
AV2
.
Devices with RGB output
&
Connect the device with RGB output with separate
Horizontal and Vertical sync to the
Horizontal and Vertical sync to the
Pr
/
R
Pb
/
B Y/G
input
1 jacks and to the
H
and
V
jacks of
AV2
3.
é
Connect the audio cables to the
L
and
R AUDIO
jacks of
AV2
.
Devices with an S-Video connector
&
Connect an S-Video cable to the
AV1
or
AV2 S-VIDEO
input.
Note: When using the
Note: When using the
S-VIDEO
connector do not connect any
device to the
AV2 CVBS
or
AV1 Y
input.
é
Connect the audio cables to the device’s
AUDIO L
and
R
jacks and to the
L
and
R
audio
AV1
or
AV2
jacks on the
TV.
DVD Player or other accessory digital source devices