Philips ccc194 Manual De Usuario
POWER
EJECT
SPEED MEMORY
CABLE
/DBS
COMBI
SMART
PICTURE
SLOW
F.ADV
INDEX
SKIP
SLEEP/
WAKE UP
1
2
3
4
5
6
7
8
9
0
CH.
VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
TRACKING
VCR PLUS+
ENTER
SEARCH
VAR.SLOW
MENU
STATUS
/EXIT
FM
CLEAR
1
Press the COMBI button, then press the VCR
PLUS+/ENTER button.
PLUS+/ENTER button.
VCR PLUS+ PROGRAM
PLUS CODE : – – – – – – – –
TO END PRESS EXIT
40 Timer Recording With the VCR Plus+ Programming System
Follow the steps below to program a timer recording using the
PlusCode programming numbers in your TV guide. Before you
begin, make sure:
PlusCode programming numbers in your TV guide. Before you
begin, make sure:
●
The clock is set. If not, CLOCK MUST BE SET appears.
●
Channels are programmed.
●
There is a tape in the TV/VCR. Make sure the tape’s record tab
is intact and the tape is long enough to record the program.
is intact and the tape is long enough to record the program.
●
You have completed the steps on pages 38-39.
Complete each step within 60 seconds of completing the
previous step. If you don’t, you may return to step 1.
previous step. If you don’t, you may return to step 1.
2
Press the Number buttons to enter the PlusCode pro-
gramming number of the program you wish to record (this
number is different for every program). Finally, press the VCR
PLUS+/ENTER button.
gramming number of the program you wish to record (this
number is different for every program). Finally, press the VCR
PLUS+/ENTER button.
3
Press the PLAY/▲ button or the STOP/▼ button to select
a ONCE, DAILY, OR WEEKLY recording. Then, press the
F.FWD/B button.
a ONCE, DAILY, OR WEEKLY recording. Then, press the
F.FWD/B button.
●
ONCE: The VCR will record a TV program once,
●
DAILY: The VCR will record every day from Monday to Friday
– starting at the same time and recording for the same length of
time.
– starting at the same time and recording for the same length of
time.
●
WEEKLY: The VCR will record on the same day, at the same
time, and for the same length of time every week.
time, and for the same length of time every week.
• You cannot set a timer recording if
DEFEAT RECORDING is ON. Details
are on page 33.
are on page 33.
• If CODE ERROR flashes after you
enter the PlusCode programming
number and press the VCR
PLUS+/ENTER button, the number
you entered was incorrect (for exam-
ple, too short). If this happens, enter
the correct number.
number and press the VCR
PLUS+/ENTER button, the number
you entered was incorrect (for exam-
ple, too short). If this happens, enter
the correct number.
• CLASH may flash on the screen after
you complete step 2. This means
that the timer recording you just pro-
grammed and another timer record-
ing overlap, and thus the current
timer recording will not occur.
that the timer recording you just pro-
grammed and another timer record-
ing overlap, and thus the current
timer recording will not occur.
Helpful Hints
VCR PLUS+ PROGRAM
>ONCE
DAILY (MON - FRI)
WEEKLY
WEEKLY
SELECT ▲▼ CHOOSE B
TO END PRESS EXIT
TO END PRESS EXIT
VCR PLUS+ PROGRAM
PLUS CODE : 89687 – – –
TO SET PRESS VCR +
TO CORRECT PRESS CLEAR
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
2
1
3