Philips dect2250g Manual De Usuario

Descargar
Página de 57
www.philips.com/faqs/dect
3
1    Environment and safety
Safety information : 
 This telephone is not designed for making emergency telephone calls when the power fails.  An 
alternative should be made available for access to emergency calling.
Power requirements : 
 The product requires an electrical supply of 120 volts, single phase alternating current, 
excluding IT installations defi ned in standard UL 60950.
Battery requirements :  
The handset requires power source of two rechargeable NiMH batteries, size AAA 1.2V 
650mAh (HR11/45).
WARNING! 
 The electrical network is classifi ed as dangerous according to criteria in the standard UL 60950. The 
only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical 
outlet is located close to the apparatus and is always easily accessible.
Telephone connection : 
 The voltage on the network is classifi ed as TNV-3 (Telecommunication Network Voltages, as 
defi ned in the standard UL 60950). Following a power cut, the call in progress is lost.
CAUTION : Users should ensure for their own protection that the electrical ground connections of the power utility, 
telephone lines and internal metallic water pipe system, if present, are connected together.  This precaution may be 
particularly important in rural areas.
Environmental care :
  Please remember to observe the local regulations regarding the disposal of your packaging 
materials, exhausted batteries and old phone and where possible promote their recycling.
Because the phone works by sending radio signals between the base unit and the handset, wearers of hearing aids may 
experience interference in the form of a humming noise.
We advise that this phone should not be used near intensive care medical equipment, nor by persons with pacemakers.
Your phone can interfere with electrical equipment such as answering machines, TV and radio sets, clock radios and computers if 
placed too close. It is recommended that you position the base unit at least one meter from such appliances.
CAUTION         
Use only the mains adapter supplied with this telephone.  Incorrect adapter polarity or voltage can 
seriously damage the unit. 
Base adapter
 
 
 
                              Charger adapter
Input:  120 VAC 60 Hz 
 
                               Input:  120 VAC 60 Hz
Output:  9 VDC 500 mA (DECT 225xx) 
 
   Output:  9 VDC 150 mA
Output:  9 VDC 300 mA (DECT 221xx)
 
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.  Never use non-
rechargeable batteries; use recommended type supplied with this telephone.  NiMH batteries must be 
disposed of in accordance with the applicable waste disposal regulations.
FCC CERTIFICATION NUMBER IS LOCATED ON THE CABINET BOTTOM
The term “IC :” before the certifi cation number signifi es that Industry Canada technical specifi cations 
were met.  This certifi cation means that the equipment meets certain radio communications and 
operational requirements.
ENVIRONMENT AND SAFETY