Philips dvdr 3400 Manual De Usuario

Descargar
Página de 78
English
18
Connecting the audio cables
This connection enables you to listen to 
the playback from this recorder. 
However, this connection is not required 
if this recorder is connected to the TV 
using the SCART or HDMI cable.
Option 1: Using an audio cable
You can connect the recorder to a two 
channel stereo system (mini system, TV) 
or receiver in order to enjoy the stereo 
sound system.
  Use an audio cable (red/white ends - not 
supplied) to connect the AUDIO L/R 
OUTPUT
 sockets to the audio input 
sockets of the connected device.
Step 1: Basic Recorder Connections 
(continued)
Option 2: Using a coaxial cable
You can connect the recorder to an AV 
amplifi er/receiver with a digital 
multichannel sound decoder in order to 
enjoy multichannel surround sound.
  Use a coaxial cable (not supplied). 
Connect the COAXIAL (DIGITAL 
AUDIO OUT)
 socket on the recorder 
to the digital input of the receiver/
amplifi er.
Before you start operating, set the digital
audio output settings accordingly (see the 
chapter “DVD Setup Menu Options - 
PLAYBACK settings). If the audio setting 
does not match your stereo’s capabilities, 
the stereo may produce a strong, 
distorted sound or no sound at all.
TIPS:  Before making or changing any connections, make sure that all the devices are disconnected 
from the power outlet.
COAXIAL
(DIGITAL AUDIO)
VIDEO (CVBS)
S-VIDEO (Y/C)
AUDIO
HDMI
R
L
OUTPUT
OUT 2
OUT 3
OUT 1
ANTENNA-IN
TV-OUT
TO TV - I/O
EXT
1
AUX - I/O
EXT
2
DIGITAL IN
STEREO / TV
Option 2
Option 1
AV amplifi er/
receiver