Philips dvdr7250h Manual De Usuario
English
42
Record to Hard Disk
(continued)
TIPS:
Setting an appropriate recording mode is important as it determines the picture quality and
recording time to the HDD or a recordable DVD, see page 38.
recording time to the HDD or a recordable DVD, see page 38.
About timer recording
Use the timer recording to automatically
start and stop a recording at a later date/
time. This recorder will tune to the right
programme channel and begin recording
at the specifi ed time.
start and stop a recording at a later date/
time. This recorder will tune to the right
programme channel and begin recording
at the specifi ed time.
With this recorder, you can schedule up
to 25 recordings at a time and up to 6
(six) hours for each recording. During
timer recording, changing the recorder’s
channel is not possible.
to 25 recordings at a time and up to 6
(six) hours for each recording. During
timer recording, changing the recorder’s
channel is not possible.
Note:
If the scheduled timer recording is
longer than 6 (six) hours, it will split into two
or more titles.
or more titles.
There are three ways to
programme a timer recording
programme a timer recording
– Using the GUIDE Plus+ system
– Using the ShowView / VIDEO Plus+
– Using the ShowView / VIDEO Plus+
system
– Using manual timer recording
About ‘VPS/PDC’
‘VPS’ (Video Programming System) or
‘PDC’ (Programme Delivery Control) is
used to control the start and duration of
TV channel recordings. If a TV
programme starts earlier or ends later
than was scheduled, this recorder will
then turn on and off at the correct time.
‘VPS’ (Video Programming System) or
‘PDC’ (Programme Delivery Control) is
used to control the start and duration of
TV channel recordings. If a TV
programme starts earlier or ends later
than was scheduled, this recorder will
then turn on and off at the correct time.
Timer recording (GUIDE
Plus+ system)
Plus+ system)
To schedule a recording with the GUIDE
Plus+ system, simply select the desired
programme from the channel list.
Plus+ system, simply select the desired
programme from the channel list.
A
Turn on the TV to the correct
programme number for the recorder
(e.g. ‘EXT’, ‘0’, ‘AV’).
(e.g. ‘EXT’, ‘0’, ‘AV’).
B
Turn on the recorder and press GUIDE
on the remote control.
The GUIDE Plus+ screen appears.
Note:
If the GUIDE Plus+ setup menu
appears, it means that this recorder has
not been installed with the GUIDE Plus+
programme data yet. See pages 28~29 to
set-up the GUIDE Plus+ system.
not been installed with the GUIDE Plus+
programme data yet. See pages 28~29 to
set-up the GUIDE Plus+ system.
C
Use
keys to select a desired TV
channel and use keys to select a
programme.
programme.
Press CHANNEL +/- to scroll
down/up a page at a time.
Press . / > to go directly to a day
before or the next day TV listings.
D
Press the Red button on the remote
control for
.
E
Press GUIDE to exit the menu.