Philips dvdr7250h Manual De Usuario

48

When you connect the camcorder to the 
VIDEO or S-VIDEO socket at the front 
panel of this recorder or the EXT1 or 
EXT2 socket at the back panel, follow the 
steps below to make the camcorder 
recording.

Before you start...
Mark the contents in the temporary 
HDD storage (time shift buffer) for which 
you wish to record to the HDD, see page 
36. Otherwise, all the contents will be 
cleared when you start camcorder 
recording.

A

 Connect the camcorder to this recorder 

(see page 25).

B

 Find the place on the camcorder that you 

want to start recording from and set the 
camcorder to pause mode.

C

 Turn on the TV to the correct 

programme number for the recorder 
(e.g. ‘EXT’, ‘0’, ‘AV’).

D

 Turn on the recorder and press CAM 

on the remote control.

 

Media type selection screen appears.

Setting an appropriate recording mode is important as it determines the picture quality and 
recording time to the HDD or a recordable DVD, see page 38.

E

 To continue, select to record to { Hard 

 } or { Recordable DVD } in the 

menu and press OK to confi rm.

 

All the contents in the temporary 

HDD storage will be cleared except for 
the ‘marked’ recordings.

  Otherwise, select { Cancel } in the menu 

and press OK to abort the operation.

F

 Press CHANNEL +/- repeatedly to 

select the correct input channel that 
matches the connected socket of the 
device.

 

{ CAM 1 } : S-VIDEO or VIDEO 

socket at the front.

 

{ EXT 1 } : EXT1 TO TV-I/O scart 

socket at the back.

 

{ EXT 2 } : EXT2 AUX-I/O scart 

socket at the back.

G

 Press REC   to start recording and 

press PLAY button on the camcorder to 
start playback.

  To pause the recording, press PAUSE 

Å.

To continue recording, press PAUSE 

Å 

again.

 

A new chapter marker is created after 

recording restarts (for recordable DVD 
only).

H

 To stop the recording, press STOP  .

 

A new title will be created when you 

begin another recording.

I

 To exit, press TUNER.