Philips dvp3040k-96 Manual De Usuario
English
28
DVD Setup Menu Options
Audio Setup Menu
1
In disc mode, press SETUP.
2
Press
1 2 to select ‘Audio Setup’ icon.
3
Press OK to confirm.
Go to Audio Setup Page
Analog Output
Digital Audio Setup
Sound Mode
CD Upsampling
Night Mode
- - Audio Setup Page - -
Analog Output
This options allows you to set the stereo
analog output of your DVD player.
analog output of your DVD player.
1
In ‘AUDIO SETUP PAGE’, press
3 4 to
highlight {ANALOG OUTPUT}, then
press
press
2.
Stereo
Select this option when output delivers
sound from only the two front speakers.
Select this option when output delivers
sound from only the two front speakers.
LT/RT
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
V SURR
Allows the DVD player to use virtual
surround sound effects.
Allows the DVD player to use virtual
surround sound effects.
2
Press
3 4 to select a setting, then press
OK to confirm your selection.
Digital Audio Setup
The options included in Digital Audio
Setup are: ‘Digital Output’ and ‘LPCM
Output’.
Setup are: ‘Digital Output’ and ‘LPCM
Output’.
1
In ‘AUDIO SETUP PAGE’, press
3 4 to
highlight {DIGITAL AUDIO SETUP}, then
press
press
2.
2
Press the
3 4 keys to highlight an option.
3
Enter its submenu by pressing
2.
4
Press
3 4 to select a setting, then press
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
Set the Digital output according to your
optional audio equipment connection.
➜
Off: Turn off the digital output.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
audio.
Helpful hint:
–
–
If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48K: Playback a disc recorded at the
sampling rate of 48kHz.
➜
96K: Playback a disc recorded at the
sampling rate of 96kHz. This rate can only
be achieved in Stereo-Classic (Flat) mode.
be achieved in Stereo-Classic (Flat) mode.
TIPS:
The underlined option is the factory default setting.
Press
Press
1 to go back to the previous menu item. Press SETUP to exit the menu item.
01-39_DVP3040K_98_engRC3
02/06/06, 11:04 AM
28