Philips fwc5-21m Manual De Usuario
![Philips](https://files.manualsbrain.com/attachments/80de5467260b5059767c26fa7238b8f78bd7bc77/common/fit/150/50/0ca3a4fc6a2509197ba66802c76c9b64194b944a2b6a8471ad8854af95c2/brand_logo.png)
19
English
AUX/ SLEEP/ RESET
AUX (Listening to an external
source)
source)
You can listen to the sound of the connected
external device through your system’s speakers.
external device through your system’s speakers.
1
Check the external device has been properly
connected. (See
connected. (See
Installation, Connecting an
additional appliance)
2
Press
STANDBY-ON to on, then press AUX
to select AUX mode.
➜ Display shows :
➜ Display shows :
3
To avoid noise distortion, turn down the volume
on your external device.
on your external device.
4
Press the
PLAY key on the connected device to
start playback.
5
To adjust the sound and volume, use the sound
controls on your external equipment and the
FWC 5.
controls on your external equipment and the
FWC 5.
SLEEP
You can set a certain period of time after which
the set will switch to standby.
the set will switch to standby.
1
Press
SLEEP repeatedly to select the desired
time period options (in minutes):
➜
Display shows in sequence: SLP 10, 20, 30,
40, 50, 60, 70, 80, 90, 00.
➜
Display shows the selected option briefly and
returns to its previous status.
2
To view the time countdown to the standby
mode, press
mode, press
SLEEP again.
To deactivate the sleep timer, press SLEEP until
SLP 00 is display or press STANDBY-ON to
switch the system to standby.
SLP 00 is display or press STANDBY-ON to
switch the system to standby.
RESET
RESET
If desired, you can restore your system to its
default setting.
default setting.
1
Remove the power plug from the wall socket.
2
Use a ballpoint pen to press the RESET for
more than 30 seconds.
more than 30 seconds.
3
Reconnect the power plug .
➜ AM
➜ AM
flashes.
➜ The system is restored to its default setting.
STANDBY ON