Philips gc6310 Manual De Usuario

Make sure the appliance has cooled down sufficiently before you put it away.

 1 

 Remove the mains plug from the wall socket and let the appliance cool down.

  

 Empty the steam tank.

  

 Regularly check if the mains cord and the supply hose are still undamaged and safe.

Do not throw away the appliance with the normal household waste at the end of its life, but 

hand it in at an official collection point for recycling. By doing this, you help to preserve the 

environment (Fig. 1).

If you need information or if you have a problem, please visit the Philips website at www.philips.com

or contact the Philips Customer Care Centre in your country (you find its phone number in the 

worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your 

local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal

Care BV.

This chapter summarises the most common problems you could encounter with your iron. Please

read the different sections for more details. If you are unable to solve the problem, please contact

the Philips Customer Care Centre in your country.

Problem

Cause

Solution

The appliance

does not become

hot.

There is a connection problem.

Check the mains cord, the plug

and the wall socket.

The steam tank is not switched on.

Make sure the steam tank switch

is set to ‘on’.

The selected temperature is too low.

Select a higher temperature.

The iron has not been switched on.

Make sure the iron switch is set

to ‘on’.

Smoke comes

out of my new

iron when I

switch it on.

Some parts of the appliance have been

lightly greased in the factory and may

initially give off some smoke when heated.

This phenomenon is perfectly

normal and will cease after a

short while.

The iron does

not produce any

steam.

The steam tank and/or the iron may not

be switched on.

Set both the iron switch and the

steam tank switch to ‘on’.

There is not enough water in the water

tank.

Fill the water tank (see chapter 

‘Preparing for use’).

The steam tank has not heated up

sufficiently.

Wait for 6 to 8 minutes for the 

steam tank to heat up.

,

11