Philips gc6310 Manual De Usuario

Descargar
Página de 64
6
General description (Fig. 1)
A
 Supply hose
B
 Temperature light
C
 Temperature dial
D
 Steam activator and lock
D1 lock
D2 activator
E
 Steam tank cap
F
 Soleplate
G
 Iron stand
H
 Steam tank
I
 Mains cord
J
 Steam tank switch with power-on light
K
 Steam control (GC6320 only)
L
 Iron switch with power-on light
important
Read this user manual carefully before you use the appliance and save it for future reference.
Check if the voltage indicated on the type plate corresponds to the local mains voltage 
before you connect the appliance.
If the appliance is provided with an earthed plug, it must be plugged into an earthed wall 
socket.
Do not use the appliance if the plug, the cord, the supply hose or the appliance itself shows 
visible damage, or if the appliance has been dropped or leaks. 
Check the cord and the supply hose regularly for possible damage.
If the mains cord or the supply hose is damaged, you must have it replaced by Philips, a 
service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. 
Never leave the appliance unattended when it is connected to the mains.
Never immerse the iron or the steam tank in water.
This appliance is not intended for use by persons (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Always place and use the iron and the steam tank on a stable, level and horizontal surface. 
Do not put the steam tank on the soft part of the ironing board.
Only use this iron with the stand supplied.
Do not let the mains cord and supply hose come into contact with the soleplate when it is 
hot.
The iron stand and the soleplate of the iron can become extremely hot and may cause burns 
if touched. If you want to move the steam tank, do not touch the stand.
When you have finished ironing, when you clean the appliance, when you fill or empty the 
water tank and also when you leave the iron even for a short while: put the iron on the iron 
stand, set the iron switch and the steam tank switch to ‘off’ and remove the mains plug from 
the wall socket. 
If steam escapes from under the steam tank cap when the appliance heats up, switch off the 
appliance and tighten the steam tank cap. If steam continues to escape when the 
appliance heats up, switch off the appliance and contact a service centre authorised by Philips.
Do not remove the cap from the steam tank when the steam tank is still hot. Follow the 
instructions given later in this manual.
Do not use any other cap on the steam tank than the cap that has been supplied with the 
appliance, as this cap also functions as a safety valve.
-
-
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
EnGlish