Philips hq802 Manual De Usuario

Read this user manual carefully before you use the 

appliance and save it for future reference.

This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a 

person responsible for their safety.

Children should be supervised to ensure that they 

do not play with the appliance.

Use and store the appliance at a temperature 

between 5°C and 35°C. 

This shaver is not waterproof and cannot be cleaned 

under the tap. Keep the shaver dry (Fig. 1).

Remove the batteries from the appliance if you are 

not going to use it for quite some time.

This Philips appliance complies with all standards 

regarding electromagnetic fields (EMF). If handled 

properly and according to the instructions in this 

user manual, the appliance is safe to use based on 

scientific evidence available today.
Preparing for use

The appliance runs on two R6 AA 1.5-volt alkaline 

batteries. We strongly advise you to use Philips Powerlife 

batteries. They supply sufficient energy for up to  

60 minutes of shaving.

 1

Remove the lid of the battery compartment (Fig. 2).

 2

Put two batteries in the battery

compartment (Fig. 3).

Make sure your hands and the appliance are dry when

you insert the batteries.

Make sure the + and - poles of the batteries point

in the right direction

 3

Put the lid of the battery compartment back onto

the appliance (‘click’).

Remove the batteries if you are not going to use the 

appliance for a month or more.

Do not leave empty batteries in the appliance.
Using the appliance

 1

Remove the protection cap.

 2

Push the on/off slide upwards to switch on the

shaver (Fig. 4).

 3

Move the shaving heads quickly over your skin.

Make both straight and circular movements (Fig. 5).

 4

Push the on/off slide downwards to switch off the

shaver.

 5

Put the protection cap on the shaver to prevent

damage to the shaving heads (Fig. 6).
Cleaning and maintenance

Regular cleaning guarantees better shaving performance.

 1

Switch off the shaver.

 2

Brush the outside of the shaving unit with the

brush supplied (Fig. 7).

 3

Remove the shaving unit (Fig. 8).

 4

Brush the inside of the shaving unit (Fig. 9).

-

-

-

-

-

-

,

-

-

 5

Brush the hair chamber (Fig. 10).

 6

Put the shaving unit back onto the shaver.

 1

Switch off the shaver.

 2

Remove the shaving unit (Fig. 8).

 3

Turn the wheel anticlockwise (1) and remove the

retaining frame (2) (Fig. 11).

 4

Remove the shaving heads from the shaving unit

one by one (Fig. 12).

 5

Remove the cutter from the guard (Fig. 13).

 6

Clean the cutter with the short-bristled side of the

brush (Fig. 14).

 7

Brush the guard (Fig. 15).

 8

Put the shaving heads back into the shaving unit.

 9

Put the retaining frame back into the shaving unit

and turn the wheel clockwise.

10

Put the shaving unit back onto the shaver.

storage 
Put the protection cap on the shaver after use to 

prevent damage to the shaving heads (Fig. 6).
Replacement

Replace the shaving heads every two years for optimal 

shaving results.

Replace damaged or worn shaving heads with HQ4+ 

Philips Micro+  Lift & Cut Shaving Heads.

 1

Switch off the shaver.

 2

Remove the shaving unit (Fig. 8).

 3

Turn the wheel anticlockwise (1) and remove the

retaining frame (2) (Fig. 11).

 4

Remove the shaving heads from the shaving unit

and replace them with new ones (Fig. 12).

 5

Put the retaining frame back into the shaving unit

and turn the wheel clockwise.

 6

Put the shaving unit back onto the shaver.

The following accessories are available:

HQ4+ Philips Micro+ Lift & Cut Shaving Heads

HQ110 Philips Shaving Head Cleaning Spray (not 

available in some countries)
environment
Do not throw away the appliance with the normal 

household waste at the end of its life, but hand it in 

at an official collection point for recycling. By doing 

this, you help to preserve the environment (Fig. 16).

Batteries contain substances that may pollute 

the environment. Do not throw away empty 

batteries with the normal household waste, but 

dispose of them at an official collection point for 

batteries. Always remove the batteries before you 

discard and hand in the appliance at an official 

collection point.
guarantee & service

If you need information or if you have a problem, please 

visit the Philips website at www.philips.com or contact 

the Philips Customer Care Centre in your country 

(you find its phone number in the worldwide guarantee 

leaflet). If there is no Customer Care Centre in your 

country, go to your local Philips dealer or contact the 

Service Department of Philips Domestic Appliances and 

Personal Care BV.

-

-

-

-

-

Problem

Solution

The shaver 

doesn’t shave 

as well as it 

used to.

You may not have cleaned the 

appliance properly. Clean the shaving 

heads thoroughly (see chapter 

‘Cleaning and maintenance’).
Long hairs may be obstructing the 

shaving heads. Clean the cutters 

and guards properly with the brush 

supplied (see chapter ‘Cleaning and 

maintenance’).
The shaving heads may be damaged 

or worn. Replace the shaving heads 

(see chapter ‘Replacement’).
The batteries may be running low. 

Replace the batteries (see chapter 

‘Preparing for use’).

The shaver  

doesn’t switch 

on when I 

push the on/off 

slide upwards.

The batteries may be empty. Replace 

the batteries (see chapter ‘Preparing 

for use’).

You may have inserted the 

batteries incorrectly. Insert the 

batteries correctly into the battery 

compartment. Make sure the + and 

- poles point in the right direction.

4222.002.4942.1

2/5