HP 589045-B21 Manual De Usuario

Processor:

Processor:

Processor:

Processor:

Two or four Intel Xeon 7400 series processors with up to 6 cores

NOTE:

NOTE:

NOTE:

NOTE: The BL680c G5 supports either two or four processors. One and three processors are not supported.
NOTE:

NOTE:

NOTE:

NOTE: All processors within the server must be identical.

Intel 7300 chip set supporting a 1066 MT/s Dedicated High-Speed Interconnect (DHSI)
Demand Based Switching (DBS) with Enhanced Intel SpeedStep® Technology on select models
Up to 16 MB of L3 cache
Intel® Virtualization Technology

Memory:

Memory:

Memory:

Memory:

Sixteen (16) DIMM slots supporting:

128 GB PC2-5300, fully buffered DDR2-667MHz memory
64 GB PC2-5300, fully buffered DDR2-667MHz low power memory
Advanced ECC memory technology
Memory interleaving (2 x 1), memory mirroring, and online spare capacity

Storage Controller:

Storage Controller:

Storage Controller:

Storage Controller:

Integrated HP Smart Array P400i Controller with 256MB ECC protected cache and RAID 0 and 1
Upgrades include:

Battery-backed write cache (BBWC) for standard 256MB cache
512MB ECC protected cache upgrade with BBWC

Optional Storage Works P700m Controller with either 256MB cache, or 512MB cache with or without BBWC
Optional IO Accelerator cards for high I/O performance

Internal Drive Support:

Internal Drive Support:

Internal Drive Support:

Internal Drive Support:

Up to two (2) small form factor (SFF) SAS or SATA hot-plug hard drives
Support for the optional SB40c Storage Blade

Network Controller:

Network Controller:

Network Controller:

Network Controller:

Four (4) embedded network adapter ports, plus one (1) additional management network adapter port:

Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP offload engine for Microsoft
Windows iSCSI boot, and optional accelerated iSCSI
One (1) NC326i Dual Port Gigabit Server Adapter
One (1) additional embedded 10/100 network adapter dedicated to iLO 2management

NOTE: 

NOTE: 

NOTE: 

NOTE: The Gigabit Ethernet adapters transmit from the server at 2000 Mbps, full duplex per port. For more
information, see the "Network Controller" item in Standards Features section.

Mezzanine Support:

Mezzanine Support:

Mezzanine Support:

Mezzanine Support:

Three (3) mezzanine expansion slots; one Type I x4 PCIe (15 watts) and two x8 PCIe (25 watts). The expansion slots
provide a choice of for additional I/O mezzanine including:

Dual Port 4Gb Fibre Channel for SAN connectivity (choice of Emulex or QLogic)
Multiple dual port 10Gb Ethernet adapter options for high bandwidth network connectivity
Multiple dual and quad port Gigabit Ethernet network adapter options for increased bandwidth and additional
network ports
I/O Accelerators for high transaction rate local storage
4X DDR InfiniBand (20Gb) for low latency, high bandwidth server interconnectivity

For additional I/O expansion, the BL680c G5 supports the PCI Expansion Blade, see:

Internal USB Support:

Internal USB Support:

Internal USB Support:

Internal USB Support:

One (1) internal USB 2.0 connector for security key devices and USB drive keys

Infrastructure Management:

Infrastructure Management:

Infrastructure Management:

Infrastructure Management:

The server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also
require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades
Firmware Maintenance website at: 

HP Integrated Lights-Out 2 (iLO 2) management processor for simplified server setup, health monitoring and recovery,
power and thermal control, and lights-out remote administration.

HP ProLiant BL680c Generation 5 (G5) Server Blade

HP ProLiant BL680c Generation 5 (G5) Server Blade

HP ProLiant BL680c Generation 5 (G5) Server Blade

HP ProLiant BL680c Generation 5 (G5) Server Blade

DA - 12773   North America — Version 41 — August 30, 2011

Page 2