Philips lx7500r-04 Manual De Usuario
Additional TV channel settings
You can change the name of a TV channel. If the reception
of a TV channel is poor, you can change the “TV system”,
switch off Stereo/2-channel sound and change the tuning of
the TV channel slightly.
of a TV channel is poor, you can change the “TV system”,
switch off Stereo/2-channel sound and change the tuning of
the TV channel slightly.
1
Press DVD/MON as often as necessary to see the
TV channel currently selected on the DVD recorder
system.
TV channel currently selected on the DVD recorder
system.
2
Press CH + or CH – or 0–9 repeatedly to select a
TV channel on the DVD recorder system.
TV channel on the DVD recorder system.
3
Press SYSTEM MENU.
4
Press
1 as often as necessary to select A.
5
Press
4 or 3 as often as necessary to select
y
Installation. Next, press
2 to confirm.
6
Press
4 as often as necessary to select Manual search.
Next, press
2 to confirm.
7
Press
4 repeatedly to select either
➜
TV channel name: to set the TV channel name,
➜
Decoder: to decode an encoded TV channel. See “Using
a decoder to decode a TV channel”,
a decoder to decode a TV channel”,
➜
TV system: to change the TV system of the TV channel,
➜
NICAM: to switch NICAM on/off,
➜
Fine tuning: to change the tuning of the TV channel
slightly.
slightly.
TV channel name
1
Press
2 repeatedly to select a character of the TV channel
name.
2
Press
3 or 4 repeatedly to set/change the desired
character.
3
Repeat steps
1 and 2 for all characters of the channel
name.
Note: Channel names are limited to 5 characters.
4
Press OK to store the TV channel name.
5
Press SYSTEM MENU to end.
TV system
If the TV system of the TV channel and that of your TV
are not the same, the sound and/or the picture may be
distorted or missing. Usually the TV system is detected
automatically.
If the TV system of the TV channel and that of your TV
are not the same, the sound and/or the picture may be
distorted or missing. Usually the TV system is detected
automatically.
1
Press
2 repeatedly to select the TV system (PAL-BG,
PAL-I, PAL-DK, SECAM, SEC-BG, SEC-DK) which
produces the clearest sound and picture on your TV.
produces the clearest sound and picture on your TV.
Note: If you change TV system to a setting not supported by
your TV set, the picture and/or sound may be missing.
your TV set, the picture and/or sound may be missing.
2
Press OK to store the setting.
3
Press SYSTEM MENU to end.
NICAM
1
Press
2 repeatedly to switch NICAM on or off:
➜
On: Stereo and 2-channel sound is supported.
➜
Off:To improve the sound quality of a weak TV channel,
only mono sound is supported.
only mono sound is supported.
2
Press OK to store the setting.
3
Press SYSTEM MENU to end.
Fine tuning
1
If the reception of the TV channel is distorted, press
3 or
4 repeatedly to change the tuning of the TV channel
slightly.
slightly.
2
Press OK to store the setting.
3
Press SYSTEM MENU to end.
System settings
52
English
Channel/freq.
CH
Entry/search
48
Programme number
07
TV channel name
PHI
Decoder
On
TV system
PAL-BG
NICAM
On
Fine tuning
0
To exit press
SYSTEM MENU
SYSTEM MENU
Installation
Manual search