Philips MC-i250 Manual De Usuario

Descargar
Página de 40
34
English
Timer setting
The system can switch on to CD,  TUNER,
INTERNET or PC LINK mode automatically at a
preset time, serving as an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
– The timer will always be switched on
after it has been set.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
– The system will switch to standby
mode if no button is pressed within 30
minutes after timer wake up.
1
Press and hold 
CLK/TIMER for more than
two seconds to select timer mode.
➜ "12:00 AM
12:00 AM
12:00 AM
12:00 AM
12:00 AM
" or "00:00
00:00
00:00
00:00
00:00
" or the last timer
setting starts flashing.
 starts flashing.
➜ The selected source will be lighted while
other available sources are flashing.
2
Press 
CDTUNERINTERNET or PC LINK
to select the desired source.
➜ For CD mode, the timer will wake up by
playing the first track of the disc or favourite list.
If the disc tray is empty, it will switch to Tuner
mode.
➜ For Tuner mode, the timer will wake up by
playing the last tuned radio station.
➜ For INTERNET or PC LINK mode, the timer
will wake up by playing the last streamed music.
If the connection fails, it will switch to Tuner
mode.
3
Press 
S or T  (or ¡  / ™      on the remote
control) to switch between hour or minutes
setting.
➜ The hour or minutes digits flash.
4
Use the navigation jog (or press 
3      /      4      on the
remote control) to set the hour and minutes.
5
Press 
CLK / TIMER to store the timer.
➜ "TIMER
TIMER
TIMER
TIMER
TIMER
", the set timer "XX:XX
XX:XX
XX:XX
XX:XX
XX:XX
" and the
selected source will be displayed.
 remains on the display.
● At the preset time, the selected sound source
will play.
To exit without storing the setting
● Press Ç.
Note:
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
Checking the timer
● Press CLK/TIMER once on the remote
control.
➜ If the timer has been activated, the set timer
information is displayed.
Activate/deactivate the timer
● Press TIMER ON/OFF repeatedly on the
remote control.
➜ If activated, the last set timer information is
displayed for a few seconds.
➜ If deactivated, “TIMER OFF
TIMER OFF
TIMER OFF
TIMER OFF
TIMER OFF
” is displayed.
Clock / Timer