Crestron mmk-4l wmkm-4l Manual De Usuario

Crestron MMK-4L & WMKM-4L 

 

Mud Mount Kits

Mud Mount Kits are the preferred mounting option for the Crestron Isys

®

  

TPS-4L and TPMC-4L wall mounted touchpanels when cutouts made in the drywall 
for touchpanel installation are too large. These kits provide support for additional 
plastering that can be applied to hide large irregularities in the touchpanel cutout. 

NOTE: If mounting into another material (other than drywall – for example, wood 
lectern, concrete, or rock) use the cutout template, available in the post-construction 
kit WMKM-4L. For concrete and rock mounting material, allow for proper 
ventilation before mounting the touchpanel. 

There are two Mud Mount Kits. The MMK-4L is a pre-construction accessory.  
Pre-construction refers to framed walls prior to hanging drywall. This accessory 
must be used with either the Pre-Construction Mount Kit (PMK-4L) or Back Box Kit 
(BB-4L). 

The WMKM-4L is a post-construction kit. Post-construction refers to framed walls 
with drywall hung. This accessory is designed with a mounting plate so that it can be 
placed anywhere on a wall without the support of a stud. 

NOTE:  If necessary, consult the latest revision of the TPS-4L Operations Guide 
(Doc. 6449) or the TPMC-4L Operations Guide (Doc. 6450) for a complete list of 
mounting options. Both documents are available from the Crestron website 
(www.crestron.com/manuals). 

The MMK-4L consists of three parts. These parts produce an assembly that attaches 
to the PMK-4L or BB-4L. The WMKM-4L consists of five parts–three of which 
make up the MMK-4L–as well as one mounting plate and one cutout template. The 
mounting plate provides the necessary support for post-construction applications. 

•  1