GarrettCom 6K8 Manual De Usuario

Descargar
Página de 76
Magnum 6K8-Series Industrial Field Switch             Installation and User Guide   (04/07) 
powered-up device at the other end of the cable) in order for a LK LED to 
provide valid indications of operating conditions on that port. 
 
2.2.3 
Eight-Port Copper Module, 6K8-RJ45   
The 6K8-Series’s 8-port Copper port module, model 6K8-RJ45, provides eight 
10/100Mb switched RJ-45 ports. The 10/100Mb switched ports normally (as a default 
setting) are independently N-way auto-negotiating, and auto-crossover (MDIX) for 
operation at 10 or 100Mb speed in full- or half-duplex mode, i.e., each independently 
selects a mode and speed to match the device at the other end of the twisted pair cable.  
   
 
 (See Section 4.3 for auto-negotiation and MDIX details). The auto-crossover feature will 
automatically determine the other side of connection to make the connection, and 
eliminate the need of crossover cable. 
On the model 6K8-RJ45 module, there are four LEDs for each port, two in the 
connector and two separate.  The LK (Link) LED indicates, “ready for operation” on that 
port when lit. The blinking ACT (Activity) LED indicates receiving Activity on that port 
when lit. The 10/100 LED 
indicates operation at 100Mb 
speed when ON and at 10 MB 
speed when OFF (when auto-
negotiation is not disabled). 
The FDX/HDX LED is ON to 
indicate full-duplex operation 
and OFF to indicate half-duplex mode. A twisted pair cable must be connected into an 
RJ-45 port and the Link (LK) indicator for that port must be ON (indicating there is a 
powered-up device at the other end of the cable) in order for a LK LED to provide valid 
indications of operating conditions on that port.  
1                    3                   5                 7
100
LK
10/
F/H
ACT
10/100
LK
        2                   4                      6                  8
 H
ACT
F/
 
Using the 6K8-Series (MNS-6K) management software, the user may disable 
auto-negotiation and fix the desired operation of each RJ-45 port. User may select 10Mb 
or 100Mb speed and full- or half-duplex mode per-port as per user requirement. (See 
Magnum MNS-6K Software Manual for details info.). 
 
 
 
12
www  GarrettCom  com
.
.