GarrettCom 6K8 Manual De Usuario

Magnum 6K8-Series Industrial Field Switch             Installation and User Guide   (04/07) 

module with two 10Mb + two 100Mb multi-mode fiber module and in combine 4 ST-

Fiber ports. All four-fiber ports are ST connectors and configured as 10Mb half duplex 

by default for 10Mb fiber and 100Mb Full duplex for the 100Mb fiber. The 10Mb ST-

fiber ports allow the user to connect their legacy 10Mb network to the Magnum 6K8-

Series switch. They also provide a convenient way for the half duplex hub to connect to 

the switch through 10Mb fiber ports. Whereas the 100Mb ST fiber module, allow to 

connect the 100Mb demand of Switch devices. It supports distances according to the 

10Base-FL standard i.e., 2Km distance for multi-mode fiber. (Single-mode for 10Km 

distance may be available as a special order). 

 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED indicating proper connectivity with the remote device when lit, and 

FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off). 

The Magnum 6KP6-

RJMSC is also a Combo 6 Port 

module equipped with 4 10/100Mb 

RJ-45 ports along with 2 multi-

mode 100Mbps fiber optic 

transceivers all in one module.  This 

is similar to the 6K6-RJMST. It has 

the same LEDs indicating port 

activity (ACT), Link (LK), and 

FDX / HDX and 10/100 operation, and the same faceplate lettering.  

 

 

4

 

 

While the functionality of these two modules is essentially the same, the 6KP6-

RJMSC is equipped with an SC-type "snap-in" connector instead of an ST-type. 

 
 

52

.

.