GarrettCom 6K8 Manual De Usuario

Magnum 6K8-Series Industrial Field Switch             Installation and User Guide   (04/07) 

 
 

60

.

.

mentioned on 5.2.4. and the LEDs also act similarly. 

 snapped in and out. The Gigabit 

                                                                                                                                                           

he GBIC transceiver h

en o

ultiple options as per 

45), whereas the single Gigabit m

 of G+2 (100Mb 

r at the same time 

and pull t

nd a 

 ports are 

1000Mbps distance limits, i.e., 10,25, 40 

or 

The Magnum GBIC-SXSC is a multi-mode Gigabit fiber connector 

equipped with SC type connectors and can be easily

fiber ports are most popular as server-to-switch and switch-to-switch applications. It 

supports cable distances up to the IEEE 802.3z standard 1000Mbps distance limits, i.e., 

550m at full duplex.  

 

 

 

T

as be

ffered in the modular slot with m

the user requirement. The two Giga port has been offered as GBPM-2OTX (fiber or RJ-

odule comes in two different flavor

fiber ports) or G+4(10/100 RJ-45 ports) as shown in the above figure. 

The GBIC transceiver is fastened using snap-in clips. Insert the transceiver 

(take care to insert it the right way up, arrows on top) until it clicks in space. While 

removing the transceiver, press the clips on either side of the transceive

he transceiver out. 

Each port has an Activity (ACT) LED indicating packets being received a

Link (LK) LED indicating proper connectivity with the remote device when lit. 

The Magnum GBIC-LXSC is a single-mode Gigabit fiber connector equipped 

with SC type connectors and can be easily snapped in and out. The Gigabit fiber

most popular as server-to-switch and switch-to-switch applications. It supports cable 

distances up to the IEEE 802.3z  

standard   1@ 1000Mb Fiber SC + 2@ 

100Mb SC