Philips VR1000 Manual De Usuario
— 30 —
Timer Recording
To record while you’re away, follow
step 1 — 9 below. For each programme
you set, the VCR will turn on, start
recording, and turn off automatically.
You can store up to 8 programmes.
step 1 — 9 below. For each programme
you set, the VCR will turn on, start
recording, and turn off automatically.
You can store up to 8 programmes.
Make sure....
• The clock is set to the correct time
• The clock is set to the correct time
before setting timer recording.
• A cassette is inserted in the VCR and
the record tab of the cassette must
not be removed.
not be removed.
1
Select Timer Mode
1 Press
TIMER
. The Timer Recording
menu appears.
2 Press
5 or ∞ to select “QUICK
PROGRAMMING” then press
OK
or
4.
The Quick Programming menu
appears.
appears.
• If you are just starting out, “P1” appears.
•
If you have already made 8
programmings, “PROGRAM FULL”
appears and goes back to the Timer
Recording menu. If this happens, delete
unwanted programmes. (✈P.31)
programmings, “PROGRAM FULL”
appears and goes back to the Timer
Recording menu. If this happens, delete
unwanted programmes. (✈P.31)
2
Select Start Time
Press
START +
or
–
(Number
button
button
1
or
4
).
• Each time
you press
the button, the set
time changes by 1-minute intervals. If
you hold the button, the set time changes
by 30-minute intervals.
the button, the set
time changes by 1-minute intervals. If
you hold the button, the set time changes
by 30-minute intervals.
– P1 –
START
STOP
21:00
=
22:00
SP
VPS/PDC OFF
DATE
TV PROG
25.12
1
BBC1
[+/–]
=
[MENU] : EXIT
3
Select Stop Time
Press
STOP +
or
–
(Number button
2
or
5
).
• Each time you press the button, the set
time changes by 1-minute intervals. If
you hold the button, the set time changes
by 30-minute intervals.
you hold the button, the set time changes
by 30-minute intervals.
4
Select Start Date
Press
DATE +
or
–
(Number button
3
or
6
).
5
Select Channel Position
Press
PROG.
+ or – to enter the TV
PROG channel position.
• To record from external line input, press
PROG.
+ or – until “L-1” for AV1 IN/
OUT connector, “L-2” for AV2 IN/
DECODER connector, “S-1” for S-Video/
Audio input jacks or “F-1” for Video/
Audio input jacks.
DECODER connector, “S-1” for S-Video/
Audio input jacks or “F-1” for Video/
Audio input jacks.
6
Select Tape Speed
Press
SPEED
.
• Each time you press the button, the tape
speed alternates between “SP” and “LP.”
7
Set PDC Mode
Press
VPS/PDC
(Number button 7) to
select “VPS/PDC ON” or “VPS/PDC
OFF”. (✈“PDC Recording” on page
31.)
OFF”. (✈“PDC Recording” on page
31.)
8
Finish Settings
Press
MENU or OK
.
“PROGRAM COMPLETED” appears
on the TV screen.
After 5 seconds, the above message
disappears, and the normal TV picture
resumes.
on the TV screen.
After 5 seconds, the above message
disappears, and the normal TV picture
resumes.
• If “PROGRAM NOT COMPLETED”
appears, try again from step 1.
If you want to store other
programmes, repeat steps 1 to 8.
programmes, repeat steps 1 to 8.
– P1 –
START
STOP
– –:– –
=
– –:– –
SP
VPS/PDC OFF
DATE
TV PROG
– –.– –
– –
[+/–]
=
[MENU] : EXIT
9
Engage Timer Standby Mode
Press
VCR POWER
to turn off the
VCR.
The
The
(Timer) indicator lights up on
the display.
The VCR must be turned off for a timer
recording to take place. If you forget to
turn off the VCR, “WARNING-
TIMER RECORDING TO START
SOON” appears on your TV screen
five minutes before a timer recording
starts. To remove the message, press
the
The VCR must be turned off for a timer
recording to take place. If you forget to
turn off the VCR, “WARNING-
TIMER RECORDING TO START
SOON” appears on your TV screen
five minutes before a timer recording
starts. To remove the message, press
the
CLEAR
button.
If you want to record the same
programme daily, press
programme daily, press
DAILY
(Number button
8
) during steps 2
through 7. (Press the button again to
cancel).
The VCR will record a TV programme
every day (Monday through Friday) at
the same time and length. (Daily
Recording).
cancel).
The VCR will record a TV programme
every day (Monday through Friday) at
the same time and length. (Daily
Recording).
If you want to record the same
programme weekly, press
programme weekly, press
WEEKLY
(Number button
9
) during steps 2
through 7. (Press the button again to
cancel).
The VCR will record a TV programme
once a week at the same day, time, and
length. (Weekly Recording)
cancel).
The VCR will record a TV programme
once a week at the same day, time, and
length. (Weekly Recording)
If you want to cancel the currently
set programme, press
set programme, press
CLEAR
.
After a timer recording has
taken place
taken place
Press
VCR POWER
to turn on the
VCR. You can operate your VCR
normally.
normally.
To stop a started timer
recording
recording
Press
VCR POWER
or
STANDBY/
ON
.
Recording stops and the VCR turns off.
If it is a Daily or Weekly Recording,
future recordings will be carried out as
programmed.
If it is a Daily or Weekly Recording,
future recordings will be carried out as
programmed.
A
DVANCED
O
PERATIONS
(C
ONTINUED
)
– P1 –
START
STOP
21:00
=
– –:– –
SP
VPS/PDC OFF
DATE
TV PROG
– –.– –
– –
[+/–]
=
[MENU] : EXIT
VR1000/07-New
99.7.8, 3:33 PM
30