Iomega 3466400 Manual De Usuario

File

S

 Quick Start Guide

 Quick Start Guide

2.  Set the 
  Clik! drive 
  into the
 Clik!
 Desktop
 Dock.

3.  Plug the Clik! Parallel Port Interface cable 
  into the back of the Clik! Desktop Dock.

4.  Disconnect power on 
 your 

computer.

5. Locate your 
 computer’s 
 parallel 

port 

 and 
 disconnect 
 any 

cable 

 already
 attached.

8.  Plug the Clik! Power Supply 
  into the Clik! Parallel Port
 Interface.

12.  Verify drive letter. 

6.  Connect the Clik! Parallel Port Interface 
  cable to your 
 computer’s 
 parallel 

port.

7.  If you have a printer, 
  connect the printer 
  cable to the Clik! 
 Parallel 

Port 

 Interface. 
  (See the User’s 
  Manual for more
 instructions.)

9.  Plug the Clik! Power Supply into an 
  electrical outlet. Plug in the power to 
  your computer and turn computer on.

11. Insert a Clik! disk into the Clik! drive 
 

(label side up) until it clicks.

10. Install Clik! Software. 
 

(Attach Windows CE

®

 

 

device if necessary).

1.  Slide the Clik!

™

 Battery 

onto 

  the back of 
  the Clik! 
 drive.

1.  Set up your host 
 computer 

using 

  one of the above 
 methods.

  Verify that the
  Clik! Battery is
 charged.

2.  Slide the Clik! Flash 
 Memory 

Reader 

  onto the Clik! 
 drive.

3.  Insert a Clik! disk into the 
  Clik! drive (label side 
  up) until it 
 clicks.

6.  Press the button on the 
  Clik! Flash Memory 
 Reader 

to 

copy files 

 onto 

the 

 Clik! 

disk. 

5.  Insert the memory card 
  into the Clik! Flash 
 Memory 

Reader.

9.  Locate copied files on the Clik! 
  disk as shown below. 

8.  Set the 
 Clik! 
 drive
 into 

the

 desktop
 dock

7.  Remove the Clik!
  Flash Memory 
  Reader from the
 Clik! 

drive.

4.  Remove the memory 
  card from your digital 
 camera.

1.  Squeeze the top and 
  bottom of the Clik! 
  disk case to open.

2. Never manually 
  open the shutter 
  of the Clik! disk.

3.  Open the drive door on the 
  Clik! drive and gently 
  insert the disk 
  (label side up) 
 until 

it 

 clicks.

4.  To eject the Clik! disk, open 
  the drive door and 
  gently the push in 
  the Clik! disk
  until it clicks.

5.  Always store and 
  transport the Clik! 
  disk in the Clik! 
 disk 

case.