Motorola DCH3416 Manual De Usuario

37

 

There are black bars on 
all four sides of the 
picture 

This may occur on a 4:3 TV if the 4:3 OVERRIDE setting is OFF. To set 4:3 SD 
programming to fill the screen, depending on the capabilities of the TV, set 
4:3 OVERRIDE to 480i or 480p. 

This may occur on a 16:9 TV if the active video for an SD broadcast is in letterbox 
format. To confirm, wait for a commercial or look for a graphic, such as a network 
logo. If the commercial fills the screen from top to bottom, or the graphic appears 
below the active video, the program is being letterboxed by the broadcaster. You can 
minimize this by activating the zoom feature on the TV. 

A broadcaster may include black bars on either side of a wide screen broadcast. This 
is called a “hybrid” aspect ratio and results in a black border surrounding the video on 
a 4:3 TV. Because this is part of the broadcast, the DCH3416 cannot correct the video. 
You may be able to minimize the border using the zoom feature on the TV.  

Colors do not appear 
correctly 

Be sure to match up each signal to the same YPbPr connection on the TV, otherwise 
the colors will not appear correctly on your TV. 

The DCH receiver is 
making a humming 
noise.  

The DCH3416 includes an integrated hard drive and a fan for cooling. During normal 
operation, the DCH3416 emits a low humming noise, similar to a personal computer. 
The noise varies in volume occasionally when the speed of the internal fan adjusts to 
changes in the temperature around the DCH receiver. Please note the hard drive will 
stay on even when the DCH3416 is turned off (standby).