Motorola DCT2000 Manual De Usuario
3 8
TROUBLESHOOTING
Before calling your service provider, review the troubleshooting guide.
This information is to help you quickly solve a problem. If your problem
still exists, contact your service provider.
This information is to help you quickly solve a problem. If your problem
still exists, contact your service provider.
Problem Possible
Solution
No sound
Press
MUTE
on the remote control to restore the
volume level.
Check that the stereo is looking at the proper
input source.
Turn your VCR on.
Check that the stereo is looking at the proper
input source.
Turn your VCR on.
No picture
Check to be sure that all cables are connected
properly (hand-tighten if necessary).
If connected through the baseband RCA video
connection, make sure the cables are
connected properly.
If you are watching TV using your VCR, be
sure your VCR is on.
properly (hand-tighten if necessary).
If connected through the baseband RCA video
connection, make sure the cables are
connected properly.
If you are watching TV using your VCR, be
sure your VCR is on.
Picture or sound is
noisy on one channel
noisy on one channel
Reconnect the cable and hand-tighten if
loose.
loose.
Sound from only one
stereo speaker
stereo speaker
Hand-tighten or reconnect the cables properly.
Be sure wires are not frayed and plugs are not
bent or broken.
Be sure wires are not frayed and plugs are not
bent or broken.
No power
Reconnect the power cord. Be sure the
DCT2000 is plugged into an outlet that is
always live.
DCT2000 is plugged into an outlet that is
always live.
Remote control does
not work
not work
Press
CABLE
on the remote control to ensure
the remote control is in cable mode.
Change the batteries in your remote control
according to the instructions in the section,
“Installing Batteries.”
Be sure that nothing is on the DCT2000 or
blocking a clear line of sight between it and
the remote control.
Change the batteries in your remote control
according to the instructions in the section,
“Installing Batteries.”
Be sure that nothing is on the DCT2000 or
blocking a clear line of sight between it and
the remote control.
Poor audio quality
For best audio quality, use the remote control
to set the DCT2000 to approximately 75% of
maximum volume level and then adjust the
audio levels on the external devices.
to set the DCT2000 to approximately 75% of
maximum volume level and then adjust the
audio levels on the external devices.