ICOM ic-400pro Manual De Usuario

ii

push the PTT when not actually desiring to trans-

mit.

use or place the transceiver in areas with tem-

peratures below –10°C or above +60°C, or in areas subject to
direct sunlight, such as the dashboard.

operating the transceiver without running the vehi-

cle’s engine. When the transceiver’s power is ON and your
vehicle’s engine is OFF, the vehicle’s battery will soon
become exhausted.

placing the transceiver in excessively dusty envi-

ronments.

placing the transceiver against walls. This will

obstruct heat dissipation.

setting the transceiver in a place without adequate

ventilation. Heat dissipation may be affected, and the trans-
ceiver may be damaged.

the use of chemical agents such as benzine or

alcohol when cleaning, as they damage the transceiver sur-
faces.

the specified microphone only (supplied or optional).

Other microphones have different pin assignments and may
damage the transceiver.

The transceiver will become hot when

operating continuously for long periods.

This device complies with Standard

Australia Specification No. AS/NZS4365-
1996 and AS4295-1995.

IC-400PRO.qxd  03.6.19 6:13 PM  Page ii (1,1)