Motorola StarTAC Manual De Usuario

81

80

81

To program the preferred SIDs to be used in P Scan mode:

(spells SYSID).

2. Press ,  and enter the appropriate 5-

digit SID number (from your

cellular service provider).

to store the SID number.

4. Press or  to scroll through the sys-

tem type choices (Home,

Roam, or Inhibit).

to select the desired system type.

and repeat steps 1 through 5 to pro-

gram another preferred SID,

to exit preferred SIDs 

programming.

P Scan

Enhanced Preferred Scanning Mode:
Phone scans for home or programmed 
preferred System ID numbers (SIDs) 
first. This mode required entry of up to 
sixty SIDs for the systems in which you 
wish to operate. Contact your cellular 
service provider for SID information.

If you have selected two system 
operation, the pone seeks cellular 
service according to the system type 
mode selected for each phone number.

80

Std AB

Std BA

Scan BA

Scan AB

Home

Scan A

Scan B

Standard Mode:
Your phone first seeks a home type 
system, then a non-home type system.

If home system is non-wireline (type A)

If home system is wireline (type B)

Reversed Preference Mode:
Your phone first seeks a non-home type 
system, then a home type system.
(This mode may be useful in fringe 
areas or certain roaming situations.)

If home system is non-wireline (type A)

If home system is wireline (type B)

Home Only Mode:
Phone will not operate outside its home 
system.

Scan A Mode:
Phone will operate only within non-
wireline (A) systems.

Scan B Mode:
Phone will operate only within wireline 
(B) systems.

StarTac.prt    3/7/00    9:46    Page  80