Motorola V505 Manual De Usuario
13
Getting Start
e
d
Charging the Battery
New batteries are shipped partially charged. Before
you can use your phone, you need to install and charge
the battery as described below. Some batteries
perform best after several full charge/discharge cycles.
you can use your phone, you need to install and charge
the battery as described below. Some batteries
perform best after several full charge/discharge cycles.
Tip: You can safely leave the travel charger connected to
the phone after charging is complete. This will not damage
the battery.
the phone after charging is complete. This will not damage
the battery.
Action
1
Insert the travel
charger plug
into your phone
with the release
tab facing up.
Be sure to insert
the plug’s
connector hooks
straight into the phone’s charger slots, so that
both hooks engage to lock the plug in place.
charger plug
into your phone
with the release
tab facing up.
Be sure to insert
the plug’s
connector hooks
straight into the phone’s charger slots, so that
both hooks engage to lock the plug in place.
Note: It may take up to 10 seconds for your
phone to indicate that the battery is charging,
depending on the battery charge level.
phone to indicate that the battery is charging,
depending on the battery charge level.
2
Plug the other end of the travel charger into the
appropriate electrical outlet.
appropriate electrical outlet.
3
When your phone indicates Charge Complete, press
the release tab and remove the travel charger.
the release tab and remove the travel charger.
Release
Tab