Creda hb48283 Manual De Usuario
Before calling a Service Engineer, please check through the following lists.
THERE MAY BE NOTHING WRONG.
SOMETHING WRONG?
Problem
Nothing works.
Display shows 0.00 AUTO. (Cordialle)
Main Oven and Grill do not
work (Cordialle)
work (Cordialle)
Main Oven and Grill do not
work.
work.
Oven does not work.
Grill does not work.
Grill keeps turning on and off.
Can not set an “Auto Cook”
programme
programme
Draught from beneath control
panel.
panel.
Timer buzzer/bleeper operates
continually
continually
Check
(a) Check
If you find :-
If you find :-
Display is blank.
Then it is likely that there is no electricity supply to your oven.
Check: (i) That the main cooker wall switch is turned on.
(ii) Check other appliances to see if you have a power
cut.
(iii) Check the main circuit breaker for the property.
(iv) With the selector switch (A) turned to the oven
(iv) With the selector switch (A) turned to the oven
light does not illuminate.
The power supply to your oven has possibly been interrupted, but
has now come back on again. Reset the timer to the correct time
of day and "Manual" operation using instructions given in the
timer section of the book.
has now come back on again. Reset the timer to the correct time
of day and "Manual" operation using instructions given in the
timer section of the book.
Check the following to ensure that the timer is in Manual Mode:
Check that the Auto Symbol is not lit up and is not flashing.
See timer section for instructions on how to return timer to
"Manual".
"Manual".
Operating the cooker under the following conditions may cause a
safety device to operate.
safety device to operate.
(a) Grilling with the door closed - always grill with the door open
to the correct position - see grilling.
(b) Grilling for an excessively long period at maximum setting -
see grilling guide.
(c) Grilling with inadequate ventilation in the cabinet - see
installation instructions.
Check that the selector switch (A) is set to and that the
temperature control (B) is set to the correct temperature.
temperature control (B) is set to the correct temperature.
Check that you have selected :- "Grill" function on the "Oven/Grill
Select" knob (A) and a Grill setting on the Temperature Control
Knob (B) - see grilling page.
Select" knob (A) and a Grill setting on the Temperature Control
Knob (B) - see grilling page.
When the Temperature control (B) is operating at less than "6", the
grill will cycle on and off, this is normal and is not a fault.
grill will cycle on and off, this is normal and is not a fault.
Remember: "Cook Period" is the actual length of time for which,
the timer will switch the oven on as part of an "Auto Cooking" pro-
gramme.
the timer will switch the oven on as part of an "Auto Cooking" pro-
gramme.
A gentle flow of air will be blown from beneath the control panel
when the appliance is used. If the appliance is still warm, this
cooling fan may run on, or restart itself after all of the controls
have been turned off.
The fan will stop once the appliance has been cooled. This is
normal and not a fault.
when the appliance is used. If the appliance is still warm, this
cooling fan may run on, or restart itself after all of the controls
have been turned off.
The fan will stop once the appliance has been cooled. This is
normal and not a fault.
Buzzer/Bleeper should stop automatically after 2 minutes. If not,
press minute minder button to silence.
press minute minder button to silence.
If you have been through the above list and there is still a problem; You should identify
your Service Agent using the list on the back page and contact your Local Service Office.
34