Marantz dv3002 Manual De Usuario

2/3), then press the ENTER 

5/∞) to select the 

3) or 

•       Press 

2 to go back to the previous menu item. 

Press SETUP to exit the menu.

•   Default setting: STEREO

•   STEREO – This option will downmix Dolby 

Digital signals directly into analogue 
stereo from L/R jacks.

•   LT/RT – This option should be used only 

if your DVD player is connected to a 
Dolby Prologic decoder.

•   VIRTUAL SURROUND – This option will 

reproduce the surround channels virtually.

•    DTS is not supported.

•    You can also select it using the SOUND MODE 

buttons on the remote control.

•   Default setting: ALL

Set the Digital output according to your 
optional audio equipment connection.

•   OFF – Turn off the digital output.

•   ALL – If you have connected your DIGITAL 

AUDIO OUT to a multi-channel decoder/
receiver.

•   PCM ONLY – Only if your receiver is not 

capable of decoding multi-channel audio.

•    If HDMI is activated, DIGITAL OUT is muted. HDMI 

audio out is related to the “DIGITAL OUT” setting. 
If set the “ALL” is set, HDMI Audio out is follows the 
EDID. If set the “PCM” is set, HDMI Audio out is 
always PCM.

•    If set the “PCM” is set, DTS is muted.

•    If you set to “ALL” with a non-DTS compatible 

amplifi er, noise will be output when you play a DTS 
disc.