Cisco Systems 7931G Manual De Usuario

You can access the most current Cisco Unified IP Phone documentation at this URL:

You can access the Cisco website at this URL:

You can access the most current Licensing Information at this URL:

Cisco international websites:

Allows access to international Cisco websites from www.cisco.com by clicking on the Worldwide 
[change] link at the top of the web page.

Refer to these sections for information about the impact of power outages and other devices on your 
Cisco Unified IP Phone.

Your accessibility to emergency service through the phone is dependent on the phone being powered. 
If there is an interruption in the power supply, Service and Emergency Calling Service dialing will not 
function until power is restored. In the case of a power failure or disruption, you may need to reset or 
reconfigure equipment before using the Service or Emergency Calling Service dialing.

The following information applies when you use external devices with the Cisco Unified IP Phone:

Cisco recommends the use of good quality external devices (such as headsets) that are shielded against 
unwanted radio frequency (RF) and audio frequency (AF) signals.

Depending on the quality of these devices and their proximity to other devices such as mobile phones 
or two-way radios, some audio noise can still occur. In these cases, Cisco recommends that you take 
one or more of these actions: 

Move the external device away from the source of the RF or AF signals. 

Route the external device cables away from the source of the RF or AF signals. 

Use shielded cables for the external device, or use cables with a better shield and connector. 

Shorten the length of the external device cable. 

Apply ferrites or other such devices on the cables for the external device.