GE 106792 Manual De Usuario

Iron won’t heat.

Water is leaking 
out of the iron.

Iron won’t steam.

Iron leaves spots 
on clothing.

Wrinkles not 
removed.

Iron too hot.

Cord is twisted.

• Is the iron plugged in and the outlet working? 

Check the outlet by plugging in a lamp. 

• Is the Temperature Control Dial turned to 

a fabric setting?

• If auto shutoff model, is the Reset Light 

illuminated? If not, push to reset.

• Do not overfill the water tank.
• If steam ironing, is Adjustable Steam Switch in a 

steam position that matches the Temperature Control
Dial steam range? Did the iron have enough time 
to preheat?

• If dry ironing, make sure the Adjustable Steam Switch

is in the DRY IRON position.

• Check the water level.
• Is the Adjustable Steam Switch in the STEAM position?
• Has the iron had enough time to preheat?

• ALWAYS empty the water tank of the iron after 

using. Water left in the tank may discolor clothing 
and soleplate.

• Check Temperature Control Dial is set to 

correct fabric.

• Check Temperature Control Dial and set to lower 

setting. Let iron cool down 5 minutes before continuing.

• Unplug iron and let cool. Hold iron cord in the middle

of entire length. Let plug and iron dangle freely until
cord uncoils. This will extend the life of your iron cord.

840097600 Ev00  2/11/02  8:47 AM  Page 7